RASI 800 MCERTS Portable Emissions and Combustion Analyser for 02, CO, NO, NO2 (NOx), SO2 and CO2% MCERTS certied. Features Standard measurement for O2,CO, NO, NO2 (NOx) NOx and CO reading in mg/m3 or ppm with O2 reference user selectable Optional SO2 and CO2% (NDIR) Integrated gas cooler with peristaltic pump for automatic condensate removal and condensate monitor and alarms Wireless RCU control and display unit for remote control of all the functions of the analyser and display measurements Automatic data logging and data export on CSV format to SD card– Sleep mode for long term measurements Programmable Auto zero function( fresh air purge) CO purge pump for preventing over saturation Special Selected Probe with heated glass wool lter, 2.7 m Viton Line. Key Benets MCERTS certied Promote health and safety and greatly reduce commissioning time thanks to the RCU wireless remote control unit Extended cells life time thanks to the built-in gas cooler and moisture removal pump which translate in very low cost of ownership and minimum down time. Suitable for long term measurement cycles Task Menu with dedicate engine/turbine/Boilers/ Furnaces pre-setting save time and reduce risk of reporting non-correct readings

RASI 800 MCERTS test Kit MCERTS Approval Measure 02,CO, NO, NO2 and SO2 and CO2% (NDIR) the RASI 800 MCERTS Test Kit is supplied as standard with temperature, pressure and draught measurements along with 02, CO, NO and NO2 The RASI 800 is now MCERTS approved to the following standard The RASI 800 MCERTS is suitable for use on gas, Oil, diesel combustions processes, solid fuels and biomass boilers and of course biogas & Landll Engines and gas turbine. True NOX ( NO + NO2 ) measurement Display NOx in ppm or mg/m3 or both at the same time Display NOx in mg/m3 with O2 reference % in term of NO2 as...

RASI 800 MCERTS Base unit Features Peltier Gas Cooler and condensate pump Fresh Air In let ( Auto Zero) CO purge pump sensors protection Host all the measurement sensors, lters, and Peltier Cooler and condensate pump A proper sample conditioner is an essential and crucial feature of any electrochemical cells based combustion or emission analysers. Our Analyser incorporate sampling conditioner features that are second to no one and that typically are only available on xed or process gas analyser. These feature includes a Thermoelectric "Peltier" GAs Cooler with automatic condensate removal pump...

control unit • Remotely control all the functions of the analysers • Display all the measurement value on its large • Blue tooth communications with the base unit • Automatic data logging on SD card • Task oriented menu with pre-set application most existing feature measurements value site and reduce the engine commissioning time. Instruments Diagnostic and display The RASI 800 has numerous instruments diagnostic pages that ensure a correct use of the analyser at all times. Alarms in such cases as "Low Flow " and " condensate too high" prompt the user of mal- functioning or anomalies. User can...

Sampling Probe RASI 800 MCERTS KIT Standard delivery Features Heated Head and heated glass wool lter ensure clean and dry gas sample going trough the analyser and help preventing moisture build-up 2.7 m Viton line ensure a smooth gas ow and prevent absorption of NO2 and SO2 gases Replaceable tip for optimal use on many Rasi 800 MCERTS Kit is supplied as standard with all the sensors, probe head and case. Standard delivery include: Rasi 800 tted with 02 ( long Life), CO, NO, NO2 cells Integral peltier gas cooler and peristaltic pump for automatic water discharge Fresh Air ( auto zero valve) inlet...

RASI 800 MCERTS specification ( base unit) Gases Specifications Standard Measured Gases 02, CO, NO, N02 Displayed Emission Value NOx in mg/m3 and ppm with 02% reference ( user selectable) CO in mg/m3 and ppm with 02 % reference ( use selectable) S02 in mg/m3 and ppm with 02% reference( user selectable) Other parameters Pressure , draught and -300 to 300 mbar differential pressure Integrated high performance peltiergas cooler with continuous condensate draining pump Solenoid valve for auto-zero (fresh air inlet) user definable Inline filter General Specifications Power Supply Li-Ion rechargeable...

RASI 800 MCERTS specication ( Remote Control Unit) Display 3” Inch TFT 6 line colour display with zoom function Operating temperature Storage Temperature Battery Life Inductive trough base unit or via USB Digital Communication Blue tooth Range RASI 800 MCERTS specication ( Calculated parameters) Efciencies 0 to CO2% max ( fuel dependant) If CO2% NDIR is NOT installed Heat losses Flow Velocity 1 to 40 m/s using Pitot Tube ( optional) RASI 800 MCERTS specication ( Sampling Probe) Heated Head Heated head with glass wool lter Sampling line 2.7 mt Viton Line, with integrated thermocouple for Temperature...