Pressure Comparators PCP series Pressure comparison pump are used for generating pressure for the testing, adjusting and calibrating mechanical and electronic instruments by means of comparison. The pressure tests can be carried out in laboratories, work shop or on site. PCP series are equipped with a fine adjustable screw type press which enable the easy reach of the desired pressure test point up to 1600 bar and a innovative priming pump to easy the generation of pressure even in large volume. PCP series can be supplied with master reference gauge such as P200, P100 or G10 series to make a complete calibration system. Semi-automatic test routine can be created when using P200 or P100 with the optional CalPman software which allows an on-line calibration procedure. PCP1000 PCP-1200/1600 The PCP series features: • Pressure range to 1600 bar • Hydraulic oil or distilled water operated • 3 different models • Portable or bench top execution • Innovative venting/bleeding system • Fine adjustment screw type press system • Priming pump for large volume filling • Easy to generate high pressure • Optional wide choice of reference instruments • SKYDROL compatible version PCP-1000-EB-VP Entry level pressure comparison test pump, basic excution for pressure up to 1000 bar with priming pump for pre-filling large volume. PCP-1200-EB-VP Pressure comparison test pump, for pressure up to 1200 bar with priming pump for pre-filling large volume. PCP-1600-EB-VP Pressure comparison test pump, for pressure up to 1600 bar with priming pump for pre-filling large volume. Ordering Information PCP-1000-EB-VP PCP-1200-EB-VP PCP-1600-EB-VP Pressure Range 0 to 1000 bar 0 to 1200 bar 0 to 1600 bar Medium hydraulic oil or distilled water Pressure Ports 2 x 1/2” BSP female rotating Fluid reservoir 400 cm2 Piston diameter 8 mm Ram screw stroke approximate 3.9 cm3 Material PCP-1000-EB-VP Comparison pump with Priming Pump, 1000 bar PCP-1200-EB-VP Comparison pump with Priming Pump, 1200 bar PCP-1600-EB-VP Comparison pump with Priming Pump, 1600 bar Please add “S” for SKYDROL or breake fluid version. stainless steel, aliminium brass, Vitom and NBR Distance between test points 200 mm (L) 600 mm Dimension (W) 280 mm (H) 220 mm Weight 8.5 kg Included accessories User manual, 2 X 1/2”BSP F adaptor, priming pump 200 mm (L) 600 mm (W) 300 mm (H) 240mm 9.9 kg 200 mm (L) 520 mm (W) 280 mm (H) 220 mm 9.9 kg On-line calibration Procedure P200 and P100 are compatible with the CalPman software which allows for semi-automatic calibration procedure and automatic report generation and calibration certificates. Accessories PCP-A-SET Set of stainless steel adapter 1/2” M BSP to 1/4” BSP F, 1/2” M BSP to 1/4” NPT F, 1/2” M BSP to M20 x 1.5, 1/2” M BSP to 1/2” F NPT, set of gasket Reference instruments LPC300 Pressure calibrator, 0.025 % FS max pressure up to 1000 bar with replaceable internal sensor P100-005 Pressure calibrator, 0.05 %FS max pressure 2000 bar P100-01 Pressure calibrator, 0.1 % FS, max pressure 2000 bar G10 Analogue pressure gauges, 0.6% FS max pressure 1000 bar Continuing development sometimes necessitates specification changes without notice. TECHNICAL SPECIFICATION 1 Eurotron Instruments (UK) ltd Unit 13 Riley Close, Royal Oak Industrial Estate Daventry, Northants NN11 8QT UK T: +44(0)1327 871044 F: +44(0)1327 301255 www.eurotron-uk.com [email protected] PCP-D-V2-18/05/2011 G10 PCP-1200/1600 with LPC300