PGS-7
2Pages

Handheld pressure test pump PGS series PGS-700/PGS-1000 The EiUK PGS pump series are a remarkable new range of hand pumps for generating vacuum, gas and hydraulic pressure from a few mbar up to 1000 bar. The pumps are the ideal tool for applying test pressures to sensors, gauges, pressure switches and any pressure device. They are a low cost solution for field and workshop use and can be supplied with the wide range of Eiuk digital pressure indicators or for OEM applications. • calibrate pressure device • 4 separate models • range from Vacuum to 1000 bar • extended kit solutions to suits different needs PGS-40 The PGS 700 and PGS 1000 hydraulic test pumps work with a variety of different fluids, including water and oil to easily generate pressures up to 1000 bar (14500 psi). The pump uses an unique “switch” which allows for fast priming or filling of the test system and then switching as needed to a smaller stroke for easier generation at high pressure. The desired pressure point can be easy tuned by using the vernier control and a precision needle vent valve allows for controlled venting. All 4 pumps can be supplied as a bare pump or in kit form with a hard transit case, set of adaptors, seals and hose. The pneumatic pumps allow pressures in excess of 600 psi to be generated with just a few strokes of the pump. By changing the push-in switching valve to vacuum, the pump will generate vacuum down to nearly 96%. PGS-7 SELECTION GUIDE Features Pneumatic pressure capability Vacuum capability TECHNICAL SPECIFICATION PGS-7 PGS-40 • • • • Hydraulic capability Integral fine control for accurate set point • adjustable stroke for over pressure safety Controlled pressure relief valve • • • • Priming operation Fluid compatible (not distilled water) Scissor action pump G10 series • PGS-700 PGS-1000 Parameter PGS-7-OEM PGS-40-OEM • • • • • • • • • • 0 to 1000 bar air air liquid liquid Fine adjustment resolution 1 mbar 1 mbar 10 to 100 mbar 10 to 100 mbar Ref port pressure connection 1/8” NPT (F) 3/8” BSP (F) 3/8” BSP (F) 3/8” BSP (F) Ref port standard adaptor • • -850 mbar to 7 bar -960 mbar to 40 bar 0 to 700 bar Pressure media 1/4 BSP (F) 1/2 BSP (F) 3/8” BSP (F) 1/2” BSP (F) Test point pressure connection 1/4 BSP (F) 1/4 BSP (F) 1/4 BSP (F) 1/4 BSP (F) Hose extension 2 x 1 meter 1 x 1 meter option option Weight 250 g 510 g 1.6 Kg 1.6 Kg Specification are based on minimum volume Reference pressure gauge A range of analogue reference gauges for the PGS pump series. All gauges are dual scale reading bar/psi and fit on the top of the PGS40/700/1000 pump by using the supplied swivel adaptor, hand tight no adaptor or spanner required. PRESSURE RANGES Model Range Accuracy Diameter G10-0000 -1 to 0 bar/-30 to 0 inHG 1% FS 63 mm G10-0002 0 to 2 bar/0 to 30 psi 1% FS 63 mm G10-0011 0 to 11 bar/0 to 160 psi 1% FS 63 mm G10-0025 0 to 25 bar/0 to 365 psi 1% FS 63 mm G10-0040 1% FS 63 mm 0 to 60 bar/0 to 800 psi 0.6% FS 100 mm G10-0100 0 to 100 bar/0 to 1400 psi 0.6% FS 100 mm G10-0160 0 to 160 bar/0 to 2000 psi 0.6% FS 100 mm G10-0250 TECHNICAL SPECIFICATION Over pressure: 30% FS Connection: 1/2” BSP (M) Fine graduation Knife pointer G10-0060 through G10-1000 -Wetted part: AISI 316 and AISI 316L, -Case: AISI 304, glass tempered G10-0000 through G10-0040 -Wetted part: brass, chrome plated -Case: AISI 304, glass normal 0 to 40 bar/0 to 600 psi G10-0060 1 PGS-700-OEM PGS-1000-OEM Operating pressure range 0 to 250 bar/0 to 3000 psi 0.6% FS 100 mm G10-0400 0 to 400 bar/0 to 5000 psi 0.6% FS 100 mm G10-0600 0 to 600 bar/0 to 8000 psi 1% FS 100 mm G10-1000 0 to 1000 bar/0 to 15000 psi 1% FS 100 mm

Hand held pressure test pump PGS series PGS-7 Low Pressure Test Kits SPECIFICATION Combined vacuum/pneumatic kit for low pressure testing includes: • PGS-7-OEM pump • Set of BSP or NPT adaptors (to be specified) • Set of seals • T pressure connection and 2 x 1 meter hose with 1/4 BSP F end • Robust ABS transit case with customised foam and cells Model PGS-7-P-BSP PGS-7-P-NPT Description Low pressure test kit, BSP adaptor 1/4” BSP male to 1/8”, 3/8” (F) and 1/2” BSP (M) Low pressure test kit, NPT adaptor 1/4” BSP male to 1/8”, 3/8”, 1/2” and 1/4” NPT (F) PGS-40 Pneumatic Test Kits...