EiUK LPC 300
2Pages

LPC300 series Documenting Pressure Calibrator The new Eiuk LPC 300 fully documenting Pressure Calibrators provide unmatched pressure measurement and flexibility over any competitive unit. It provides 0.025 % FS accuracy on his internal interchangeable isolated stainless steel pressure sensor. A selection of more than 30 pressure modules for gauge negative and absolute pressure measurement covering a range up to 1000 bar makes the LPC300 the ideal pressure calibration tool for field application. Calibrator features: • 0.025 % FS accuracy • Pressure measurement up to 1000 bar with replaceable Internal Sensor • Read Voltage and Current • 24 VDC loop power supply for TRX under test • Simultaneous pressure and current display for easy P/I testing and calibration • Automatic switch test with dead band calculation • Selection of 15 pressure units The innovative interchangeable pressure module • Standard deviation in % of FS or RDG or makes the unit easier to carry and operate, unlike pressure unit all the other pressure calibrator available in the • Powered by Li-Ion long lasting rechargeable market where to extend the pressure range the battery with universal charger user needs to use external pressure module, • Fast choice of Pneumatic, Hydraulic or making the whole system less portable. combined pressure kit The true documenting procedure with on board pass/fail result can be input directly from keyboard which facilitate the change of the procedure while operating on field in event of wrong data input. Ordering Information TECHNICAL SPECIFICATION Range code Range 025G -250 to 250 mbar g 040G -400 to 400 mbar g 060G -600 to 600 mbar g 1.5G -1 to 1.5 bar g 3G -1 to 3 bar g 5G -1 to 5 bar g 9G -1 to 9 bar g 15G -1 to 15 bar g 20G -1 to 20 bar g 24G -1 to 24 bar g 40G -1 to 39 bar g 60G 0 to 60 bar g 100G 0 to 100 bar g 160G 0 to 160 bar g 250C 0 to 250 bar g 400G 0 to 400 bar g 600G 0 to 600 bar g 700G 0 to 700 bar g 1000G 0 to 1000 bar g 040A 0 to 400 mbar A 060A 0 to 600 mbar A 1A 0 to 1 bar A 1.6A 0 to 1,6 bar A 2.5A 0 to 2,5 bar A 4A 0 to 4 bar A 6A 0 to 6 bar A 10A 0 to 10 bar A 16A 0 to 16 bar A Electrical Accuracy ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.035 % FS ±0.035 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS ±0.025 % FS Resolution 0.001 mbar 0.001 mbar 0.001 mbar 0.01 mbar 0.01 mbar 0.01 mbar 0.01 mbar 0.0001 bar 0.0001 bar 0.0001 bar 0.0001 bar 0.0001 bar 0.001 bar 0.001 bar 0.001 bar 0.001 bar 0.001 bar 0.001 bar 0.01 bar 0.001 mbar 0.001 mbar 0.01 mbar 0.01 mbar 0.01 mbar 0.01 mbar 0.01m bar 0.0001 bar 0.0001 bar mA 0-20 mA 4-20 mA measure ± 1.6 micro A 0-10 VDC measure ± 0.5 mV 24 DVC min 20 mA, max 50 m Screens n/a Accuracy: include non-linearity, hysteresis and repeatability Temperature compensation: Fully between 0 and 50 °C Supported pressure units: bar, mbar, hPa, psi, inHg, cmHg, MPa, kPa, Pa, mH20, cmH20, mmH20,psi, Kg/cm2, inH20, mmHg and one user-defined Pressure media: all liquid and gas compatible with AISI 316 (non-corrosive) Pressure connection: 1/2” BSP M Operating temperature range: -0 to 50°C, 80% RH Humidity non condensing Storage temperature: -20 to 60°C, 80 % RH non condensing Loop power supply: 24 VDC Electrical connection: standard 4mm plug for electrical input Communication: serial RS232, USB Display: graphic, 128 x 128 pixels, 44.7 x 47 mm Sealing: IP 54 (exclude socket) Power supply: Lithium-Ion rechargeable battery, no memory effect Size (H x W x D): 12.5 x 21 x 8 cm Weight: 1.1 KG, Warranty: 2 year 1 When ordering the LPC 300 please specify one pressure range from the table. When ordering LPC 300 HPC combined kit, please specify both ranges. For any additional pressure range, please refer to the table on the next page. 0.1 mV Loop LPC300PC - 40G/9G - NPT (typical order code for 2 sensors) LPC 300 pneumatic pressure calibrator kit, complete with 2 sensors, -1 to 39 bar and -1 to 9 bar and NPT adaptor. 1 micro A Volts Each LPC 300 is supplied as standard with 1 internal pressure sensor, a traceable calibration certificate, a rechargeable battery, an universal charger, an USB cable, Software, an user guide Model LPC300 I Pressure Calibrator LPC300 PC Pneumatic Pressure Calibrator LPC300 HC Hydraulic Pressure Calibrator LPC300 HPC Combined Hydraulic Pneumatic kit Range code (select from table up to 5 ranges) Adaptor set 0 No adaptor set (only for LPC 300 I) NPT A set of NPT adaptors BSP A set of BSP adaptors Switch Test Documenting Deviation

Documenting Pressure Calibrator LPC300 series LPC 300 documenting pressure calibrator uses an innovative system of pressure sensor. Unlike the conventional pressure calibrator that uses remote pressure sensor to extend the rangability of the product, LPC 300 uses interchangeable “plug and play” pressure sensor. In this way the pressure calibrator head is always directly connected to the pressure generator, making the system easy to operate an much more transportable with out having annoying flying cable connection between the head and the remote sensor. LPC-300 PC Pneumatic Pressure...