DuraNAV A low power ruggedised system for real-time vehicle tracking Features General Features: • ireless features for high precision vehicle localization W and enhanced communications • ompliant with the EN50155 and ECE standards C (conformal coating of the modules installed inside the AVL Light is available upon request) • Temperature Range: ◦◦ –25°C ~ +70 °C ◦◦ +85°C for 10 min. (EN50155 class T3) • anless cooling system F • ugged Chassis Design R • rotection IP54 (can be extended to IP65) P • aximum Power Consumption: 10W M • aximum Weight: 2Kg M • SB 1.1 port (optional second port available) U • ast Ethernet (10/100 Mbps) F • CAN Bus • x Serial Ports (RS-232/422/485) 2 • x Opto-isolated Digital Inputs 4 • x Opto-isolated Digital Outputs 4 • Odometer Input • rogrammable Identifier Line P • udio I/O interface A • nalog Video out (optional) A RoHS: • Fully RoHS (2002/95/CE) Compliant The DuraNAV is a Eurotech low power system designed to be an inexpensive solution for enhanced communications and real-time vehicle tracking (fleet management). It can be used in harsh environmental conditions where the use of rugged devices is essential. The DuraNAV system is compliant with the EN50155, and ECE standards; it can withstand shocks, vibrations and high humidity, maintaining high reliability and precision. It is resistant to extended temperature ranges, -25°C/+70°C (+85°C for 10 min.), without using any active cooling systems. The rear panel of the system is provided with 3 SMA antenna connectors that interface the 12 channel GPS for localization, Wi-Fi (802.11b, g) and Tri-band GSM/GPRS (EGSM900/ GSM1800/GSM1900) for enhanced communications. Also 2 circular connectors are installed, integrating the following: Fast Ethernet controller, 2 (RS232/422/485 configurable) Serial Ports, 4 Opto-isolated Digital Inputs, 4 Opto-isolated Digital Outputs, an Odometer Input, Audio I/O connections, one USB 1.1 port and one CAN Bus. Furthermore the DuraNAV features an identifier line that can be used to connect an EEPROM device for the user or vehicle identification. Optionally a third circular connector can be installed to give a VGA output (640x480 – 16 colors) and an auxiliary USB 1.1 port. The front panel features 6 LED Indicators (4 dedicated to the DuraNAV status and 2 user programmable) and, after removing a protective plate: a SIM card holder, USB 1.1 debug port, Serial ports & Odometer configuration jumpers, a Test Serial Port connector and Reset connector. In this way the maintenance can be performed without

Standards Compliance • Climatic compliance: EN 50155 (Humidity, Ambient air temperature, Storage temperature) • Mechanical compliance: EN61373 (Vibrations & Shocks) • Electrical compliance: EN 50155 (Power supply voltage interruption, Surges, Insulation resistance) • EMC compliance: EN 50121, EN 61000, EN 55011, ECE ONU reg.10 (Immunity, Emission) • Safety compliance: EN 60950 Back Panel • 3x Female SMA antenna connectors : ◦ Wi-Fi ◦ GSM/GPRS ◦ GPS • Male circular connector: ◦ Power input ◦ 4x Opto-isolated Digital Inputs ◦ 4x Opto-isolated Digital Outputs ◦ Ignition key ◦ Identifier line ◦ 1x...