CPU-1484 Pentium® M Fanless SBC with Gigabit & Fast Ethernet General Features: Architecture: • PC/104-Plus compliant Processor Availability: • Intel® Pentium® M 1.4GHz, 2MB L2 cache, 400MHz FSB Chipset: • Intel® i855GME System Memory: • 5 12MB DDR, 266MHz (PC2100), soldered onboard Supported Operating Systems: • WinCE®, WinXPE® and Linux® BIOS Flash: • 1 MB Flash EPROM Interfaces: • IDE ATA 100 Controller • Serial ports: - 1x RS-232 - 1 x RS-232/422/485 • 4 x USB 2.0 ports • Gigabit Ethernet (Intel® 82541 chipset) • 10/100 Mbps Ethernet (Intel® 82562 chipset) • Graphic controller with analog VGA and Flat Panel L VDS interface • AC97 audio interface • Keyboard and Mouse Bus: • PC/104-Plus (PCI) • PC/104 (ISA) Watchdog: • 2-255 seconds / minutes Power Supply: • Single +5V DC The CPU-1484 is an embedded RoHS compliant board based on two modules: a mezzanine CPU module combined with a PC/104-Plus form factor carrier. The mezzanine CPU module features the Intel® Pentium® M 1.4GHz (having 2MB L2 cache and 400MHz FSB) processor and its Intel® i855GME chipset. The system comes with 512MB DDR, 266MHz (PC2100), soldered onboard. No active cooling is required to operate within the standard and extended temperature ranges. The carrier implements all the connections to the external world, including 4 USB 2.0 ports, 1 Gigabit Ethernet interface (1000/100/10Mbps), 1 Fast Ethernet interface (10/100Mbps), 2 Serial ports, Analog VGA and Flat Panel LVDS outputs, 1 AC97 interface, Keyboard and Mouse connectors and an IDE controller that supports IDE Flash device (Disk-On-Module, Compact Flash and Flash Disk). The carrier also performs the connections for the ISA and PCI bus enabling the CPU-1484 to stack on top of a PC/104-Plus system. The carrier provides support for Watchdog management and Real Time Clock (external backup battery) and can be customized to match specific customer needs. • Fully RoHS (2002/95/CE) Compliant The BIOS for the module is embedded and is located in a 1MB Flash EPROM, it is fully re-programmable onboard. The set-up parameters are saved in Flash to allow the module to operate without a battery.

Embedded Enhanced BIOS Physical Characteristics • Standard Phoenix BIOS • Boot Watchdog Management • Set-Up in Flash in order to avoid Set-Up corruption in field • Remote console redirection: allows a system with no keyboard and no video hardware to transmit video and keyboard data to a host system via the serial port • Etherboot support: allows the system to boot up from a LAN connection for diskless operation POWER SUPPLY Single +5V DC +/- 5% POWER CONSUMPTION 14.5 W typical HUMIDITY Up to 95% non-condensing Accessories • Temperature monitor with hardware thermal management circuit •...