Celeron 40 0MHz Fanless SBC with 4x USB 2.0 ANd 4x USB 1.1 ports (RoHS) Architecture: PC/104-Plus compliant Processor: Intel® Celeron® 400MHz, 256KB L2 cache, 100MHz FSB Chipset: Intel® 815E Memory: 256MB SDRAM soldered onboard Supported Operating Systems: WinCE®, WinXPE® and Linux® BIOS Flash: 1MB Flash EPROM Interfaces: • IDE Controller Ultra DMA • Serial ports: - 1x RS-232 • 10/100 Mbps Ethernet (Intel® 82562ET chipset) • Video Controllers: - Analog VGA output - Digital LVDS output • Keyboard and Mouse Bus: • PC/104-Plus (PCI) • PC/104 (ISA) Watchdog: 2-255 seconds / minutes Power Supply: Single +5V DC The CPU-1452 is an embedded RoHS compliant board based on two modules: a mezzanine CPU module combined with a PC/104-Plus form factor carrier. The mezzanine CPU module features the processor and its Intel® 815E chipset with 100MHz bus frequency. The processor is the Intel® Celeron® 400MHz. The system comes with 256MB SDRAM soldered onboard. No active cooling is required to operate within the standard and extended temperature ranges. The carrier implements all the connections to the external world, including 8 USB ports (4x USB 1.1 and 4x USB 2.0), 1 Fast Ethernet interface (10/100Mbps), 2 Serial ports, Analog VGA and Digital LVDS outputs, 1 AC97 interface, Auxiliary Power, Keyboard and Mouse connectors and an IDE controller that supports any type of IDE Flash device (Disk-On-Module, Compact Flash and Flash Disk). The carrier also performs the connections for the ISA and PCI bus enabling the CPU-1452 to stack on top of a PC/104-Plus system. The carrier provides support for Watchdog management and Real Time Clock (external backup battery) and can be customized to match specific customer needs. The BIOS for the module is embedded and is located in a 1MB Flash EPROM, it is fully re-programmable onboard. The set-up parameters are saved in Flash to allow the module to operate without a battery. E-maiL: [email protected] http://www. eurotech

Embedded Enhanced BIOS • The Eurotech BIOS with enhanced embedded features can be easily customized and upgraded to match the specific system configuration. • Watchdog management. • Set-Up in Flash in order to avoid Set-Up corruption in field. • Virtual Peripheral Support (V.P.S.): this mode allows users to bootstrap from the parallel or serial ports and redirect Keyboard, Video and Floppy Disk on the serial/parallel ports before booting the Operating System. It is also possible to redirect any of these peripherals as default setting. • Etherboot support: this feature allows the system to boot...