RS-V3 Series RS-V3 Series Rectangular limit switch is a highly dependable, non-voltage dependant, hermetically sealed position sensor which consumes zero power due to its volt-free dry contacts. It requires the use of a magnetic target to operate and is manufactured with a robust engineered resin housing in an industry standard V3 style that is suitable for mounting in a switch box Features + Sensing range dependant on target magnet.(e.g. 4mm with N35 05x3mm) + Volt free SPDT/SPCO (Form C) 830mA contacts as standard. + -20°C to +80°C / -4°F to +176°F working temperature. + Terminated with PVC Cable or lead wires Refer to diagram(s) above for dimensions of product variants. Notes & Abbreviations # Please consult factory before quoting these items where applicable. IS - Intrinsically Safe. GI - General Industrial. Standard Approvals 1 General Industrial Intrinsically Safe Zone 0 & 20 f Regional Approvals Intrinsically Safe (Ex ia) ECASEx # CCC Ex / NEPSI PESO KCs # INMETRO EAC /TRCU (UAE) (China) (India) (Korea) (Brazil) EAC* * Russia, Kazakhstan, Belarus. t also suitable for zones 1,2,21 & 22. Body Material 0 Engi neered Resin Consult factory for alternative body material. Standard Temperature 1 PVC Cable Additional cost per meter over 2m. -20°C to +80°C All hard wired switches are supplied with 2 meters (78") as standard. Contact Arrangement - SPDT/SPCO (Form C) Standard Normally Open Contact Material - Rhodium Standard Some options may be combined. Please consult factory. Non Standard Cable/Lead Lengths - Standard length is 2 metres xxM Non standard length, specify in metres e.g. -10M t Temperature range must be 1 Options may be combined. Please consult factory.