ES-Series - Magnetically Actuated ES-0 Series - SPDT/DPDT ES-0 Series Rectangular (90.00mm/3.54” x 30.00mm/1.18”x 23.00mm/0.91”) proximity switch has the widest range of options in our portfolio of rectangular switches, including globally multi certified options, which makes it ideal for applications such as doors and hatches. Features + Sensing range <18mm (0.71") with target magnet. See table below for options. + Volt free SPDT/SPCO (Form C) 2.5A contacts as standard. + -60°C to +204°C / -76°F to +400°F temperature options. Options + Global Certification (Multi certified options available). * Volt Free DPDT/DPCO (2 x Form C) 2.5A contacts. 1 - Product Series 2 - Certification 3 - Material 4 - Temperature Range 5 - Additional Options 6 - Connection Options ES-0 90.00 x 30.00 x 23.00mm 1/2" NPT conduit entry Refer to diagram(s) above for dimensions of product variants. Sensing Ranges Magnet Range Given sensing ranges relate to primary sensing face. Secondary and Tertiary sensing faces will see a reduced sensing range. Notes & Abbreviations # Please consult factory before quoting these items where applicable. IS - Intrinsically Safe. GI - General Industrial. Standard Approvals 1 General Industrial 2 IECEx/ATEX/UKEx Ex ia NC/INC Intrinsically Safe Zone 0 & 20 f 3 IECEx/ATEX/UKEx Ex db/tb NC/INC Explosion Proof Zones 1, 2, 21 & 22 4 UL/CSA Class I&II Div 1 Groups A-G No lead seal required 5 UL/CSA Class I&II Div 2 Groups A-G No lead seal required 6 UL/CSA Ordinary Location General Purpose 7 UL/CSA Class I,II & III Div 1 Intrinsically Safe Zone 0 Multi Approvals B IECEx/ATEX/UKEx Ex db/tb & UL/CSA Class I&II Div 1 D Globally Approved - Explosion Proof Includes approvals 3,4,P,R,X,Z hardwired & 3,4,P,R,V,X,Z wireable. Regional Approvals Explosion Proof (Ex db/tb) K TS Mark (Taiwan) Regional Approvals Intrinsically Safe (Ex ia) W INMETRO (Brazil) * Russia, Kazakhstan, Belarus. t also suitable for zones 1,2,21 & 22. Body Material 2 316L Stainless Steel Consult factory for alternative body material. Standard Temperature 1 PVC Cable Additional cost per meter over 2m. -20°C to +70°C (+80°C IS & GI) -40°C to +100°C (Certifications 4, 5 & 6) Low Temperature 2 Polyolefin Cable Polyolefin Cable - IS certification Additional cost per meter over 2m. -60°C to +120°C (+125°C IS & GI) -60°C to +105°C (Certifications 4, 5 & 6) High Temperature 4L PTFE/Teflon™ Leads Additional cost per meter over 2m. -40°C to +204°C Certification limitations apply 5L PEEK Leads Additional cost per meter over 2m. Only available on Ex db & GI. -40°C to +204°C Certification limitations apply All hard wired switches are supplied with 2 meters (78") as standard. Contact Arrangement - SPDT/SPCO (Form C) Standard LFC Line Fault Monitoring NAMUR (Normally Closed) Ex ia & Standard Temperature* LFO Line Fault Monitoring NAMUR (Normally Open) Ex ia & Standard Temperature* Contact Material - Rhodium Standard AU Gold Flashed Contacts H Tungsten Contacts Earthing/Grounding E Earth (Ground) wire Required on certifications 4, 5 & 6 * Low Temperature & Ex db/tb version available please consult factory. Some options may be combined. Please consult factory. Non Standard Cable/Lead Lengths - Standard length is 2 metres xxM Non standard length, specify in metres e.g. -10M t Temperature range must be 1 Options may be combined. Please consult factory.