PRIMARY INJECTION TEST SYSTEM

The Raptor System: Applications Multifunctional Primary Testing System Raptor - Control The Raptor is a smart test system designed as the ultimate solution for the main primary test applications required in the commissioning and maintenance of substations, marking the difference with respect to existing equipment now being used. This new generation of Primary Injection Test System makes primary testing easier, faster and more convenient. The system consists of a Master unit which can be upgraded with up to four Slave sets which add further power capacity to the system. The user is not limited...

The Raptor System: Applications The Raptor System: Applications Switchgear Testing The combination of mobility, adaptability, automatic output regulation, high-tech, ease of use and versatility makes the Raptor the best system available in the market for all major primary injection testing applications in and around substations and power plants: Primary Current Injection Testing Primary Injection Testing is essential in commissioning and verifying a protection scheme. The secondary injection test does not check all the components in the system, as it cannot provide the condition of the overall...

The Raptor System: Features The Raptor System: Benefits Automatic Output Regulation DSP technology maintains an uniform current waveform even with changing load impedances and speeds testing by eliminating the manual variac. Every other high current system requires the user to manually set the output current. It also overcomes heating of the trip elements which caused the current to drop during the test. Weight and Size Amazing portability compared to other existing equipment, due to its light weight and small size, that allows one person to carry it, even in his own car. The modularity allows...

The Raptor System: Raptor HV Raptor Polarity Tester The Raptor-HV, the High Voltage slave, is an optional product that extends the Raptor’s applications to tests that require the use of high AC voltage, up to 2 KV. This product works in combination with a Raptor Master and is visually similar to it. The Raptor HV connects to the master unit via the Expansion Port, from where it also takes the necessary power. The Raptor HV is a pluggable high voltage peripheral that takes advantage of all the valuable features in the Raptor Master including the electronically controlled switching amplifier, DSP...

The Raptor System: Specifications The Raptor System: Specifications / Accessories rSMC formula Innovation RAPTOR MS (values @240 Vac, 50 Hz, 1 turn sec. 960 mm2, measured 25 cm on each side) HIGH CURRENT OUTPUT Output Current Output Voltage No Load Resolution 25 uVac Output Frequency 20 - 400 Hz (Power reduction applied at 50 > f > 60 Hz) LOW CURRENT OUTPUT (not simultaneous with high current output) GENERAL Supply Weight Dimensions Working temperature Storage temperatura Protections Sec. hole diameter Transport 230 V ±10%, 50/60 Hz (single phase) 35 Kg / 77 lb 550 x 440 x 230 mm / 21 W” x 17...

N° sec. Compliance Voltage (V)_ Max. Current (A) Max. Current (A) Max.Current (A)turns raptor C-05 RAPTOR C-15 RAPTOR C-25 RAPTOR C-35 Continuous 3 minutes 3 seconds 1.20 - (0.22) 2.79 - 0.26 4.39 - 0.87 5.98 - 1.48 ACCESSORIES INCLUDED WITH EACH UNIT Ethernet cable User’s Manual 1 x Raptor-WA + 1 x Raptor-MS 1 x Raptor-WA + 1 x Raptor-MS + 1 x Raptor-SL Raptor Master Unit Power Supply Cable, 3 m Low-level voltmeter cable, 2 m Connection cables set Spare fuses Set of alligator type clips Nylon protective bag Calibration Certificate RAPTOR C-25 RAPTOR C-35 RAPTOR CV-XX 1 x Raptor-WA + 1 x Raptor-MS...