PTE-100-C / PLUS / PRO Single-phase current and voltage relay test equipment up to 250 A The PTE-100-C and the Plus and Pro versions were designed as powerful, rugged and flexible tools for the wide diversity of maintenance jobs in substations and transformation centers. Both feature a 1000-VA voltage regulator and highly accurate digital instruments that provide the quality and effectiveness required for in-field testing of power-demanding electromechanical relays, as well as static, digital and the most sophisticated multi-functional numerical relays where precision and ease of use are essential....

EASY TO USE All the controls and displays are intuitively located and ergonomically designed. The thick regulation knob provides an accurate and smooth adjustment of the test quantities. Four current ranges deliver the available 1000 VA power regardless the working scale, and allow for fine adjustment and distortion-free injection even on the biggest electromechanical loads. PTE-100-C base unit The test set is protected with automatically resettable overload and thermal trips, and the tested device can also be protected against accidental mistakes like excessive current or too long injection...

Time-delay starting relay Distance 1Ø Volts / Hertz Synchronizing AC / DC Undervoltage 1Ø directional power DC Under / overvoltage Loss of field Reverse phase Negative Sequence Overcurrent Reverse phase voltage Thermal relay Instantaneous Overcurrent Relay Timed Overcurrent Relay Overvoltage Relay Ground detection relay Directional overcurrent relay Ground directional overcurrent relay Phase angle / Out of step relay Reclosing relay Frequency relay DC reclosing relay Directional voltage relay Directional voltage & power relay Tripping relay Dry- or energyzed contact detection up to 250 V Multifunctional...

Digital 1millisecond programmable chronometer and comprehensive set of measurement and test control functions. The PTE-100-C Pro’s independent voltage module provides the necessary voltage injection for direccional relays and generador or motor protections. This module can also be purchased separately and installed in the PTE-100-C’s lid in a few minutes. Frequency reference selection Multi-function knob (amplitude, angle, frequency) Fine / coarse adjustment selection Voltage, frequency and phase angle display RS-232 and BUS-PTE communications 250, 50, 25 and 5 A, 1000-VA output taps Digital...

PTE-100-C / PLUS / PRO INTERCONNECTION FEATURE The PTE-100-C can be linked to any other members of the PTE family by means of the EuroSMC’s exclusive PTE BUS. This modular architecture provides an elegant and cost-effective way of composing a highly interoperable test platform right when you need it, whereas the individual units can be used separately for simpler test and maintenance jobs. For example, complex distance protections and many other three-phase relays can be tested by interconnecting the PTE-100-C and the three-channel PTE-300-V unit. MEASUREMENT FUNCTIONS SET • Ammeter: external...

OPTIONAL ACCESSORIES PTE-FCC: Load option PTE-FCC consists of a set of resistors and one capacitor. By connecting one or more resistors in series with the current injection circuit, the adjustment accuracy and the quality of the waveform increase when working with low-impedance receptors. Current-to-voltage angles up to nearly 90 degrees can also be achieved when combining the capacitor and the resistors. Resistane values and dty cycles are listed in the following chart: PTE-FCC PTE-FCB: In-field MCB testing PTE-FCB Provides a convenient DIN bracket and adjustments for the testing of low voltage...

PTE-100-C / PLUS / PRO TECHNICAL CHARACTERISTICS AUXILIARY VOLTAGE OUTPUT MAXIMUM CURRENT DIGITAL CHRONOMETER Range: Time mode: 0.001 - 99999 s. (autorange). Cycle mode: 000.1 a 9999.9 Cycle (of the power supply frequency). Upon activation / deactivation of output Upon activation / deactivation of input monitor. MEASUREMENT FUNCTIONS CURRENT (Aac) SIGNAL MONITOR PHASE ANGLE (degrees) Open-circuit voltage: 10.2 Vdc Short-circuit current: 25 mA. Fuse protected Voltage input: Input range: 5 - 250Vac/dc Impedance: 19 KΩ Fuse protected GENERAL Temperature: Operation: 0-50° C Temperature storage: -25°...