Primary injection Equipment DESCRIPTION The LET range addresses test applications that require high levels of AC or DC current, typically primary current injection. The generation power of the various models ranges from 1,000 to 8,000 VA or Watt. The output voltage is adjusted by means of a variac at the primary winding of the output transformer. The injected current is measured and displayed by a built-in digital ammeter. We provide several output taps in order to better adapt the voltage range to the connected load’s impedance. This also makes adjustment of lower currents easier, while maintaining...

<o£APHl| TLI’TE Additionally to the 4 current taps, the LET-400-RDC features auxiliary AC and DC voltage outputs, whereas the more economical LET-400 has no measurement displays. 15 min. 20 min. 20 min. 30 min. OFF (cool-down) time at 25°C / 77° F SPECIFICATIONS SPECIFICATIONS Power Supplied test leads Power supply Consumption Dimensions 2,000 VA 2 cables, 3 meter / 10 ft. length, 185 mm2 Single-phase 110/230 VAC (specify), 50-60 Hz 12.8A @ 220V 380 mm x 310 mm x 540 mm / 15 in.x 12 in.x 21 in. SPECIFICATIONS Power Supplied test leads Power supply Consumption Dimensions Weight (unit only) Weight...

DUTY CYCLELET-2000-RD / 2000-RDM ON TIME/MAXIMUM CURRENT ON TIME/MAXIMUM CURRENT Tap No-load V Continuous 60 min. 15 min. 3 min. 1 min. 1 sec. The LET-2000-RD / 2000-RDM / 4000-RD / 4000-RDM units are constructed in two units for easier transportation. The RDM version replaces the traditional adjustment knob with a pair of push buttons that control a motorized variac for up- and down- regulation, for applications where a greater distance between the control board and the actual power output connections is required. LET-4000-R Please note: Due to the continuous research and development by EuroSMC,...