Eurofault

Product catalog summary

Overview: The EUROFAULT software is designed for capturing and playing back COMTRADE files of faults, either simulated or calculated. It is particularly useful for analyzing the behavior of protection relays or systems by replaying faults exactly as they occurred.

Main Features:

Windows-based interface that is user-friendly and requires minimal effort to retrieve COMTRADE files.
Editing capabilities include adding pre-fault cycles, removing DC offsets, cutting unwanted cycles, and resampling.
Compatible with most PTE Range equipment, except PTE-100-C.
Supports editing of pre-fault and post-fault durations, as well as voltage and current channels.
Interpolation of waveforms to increase sample numbers for smoother playback.
Maximum playback capacity of up to 32 Kb per channel, equating to 800 cycles at 40 samples per cycle or 1600 cycles at 20 samples per cycle.

Editing and Analysis: The software allows for detailed editing of three currents and three voltages, either separately or superimposed. Specific zones can be enlarged for in-depth analysis, and the sampling rate can be adjusted to enhance the study of specific sections.

Control Panel: By connecting the software to the equipment, users can play back COMTRADE files with desired modifications. Users need to input current and voltage transformer ratios for secondary injection through the equipment.

Additional Information: The document notes that specifications may change due to ongoing research and development by EUROSMC.

Catalog excerpts

EUROFAULT SOFTWARE Capture and play-back software for COMTRADE files APPLICATION – Playback of previously registered faults and transients, or calculated by EMTP programs. – Enables to analyze the behavior of a protection relay or system against the above mentioned. MAIN FEATURES – Windows based. – Extremely easy to edit in terms of adding pre-fault cycles, adding the cycles, etc. – Compatible with any combination of the PTE Range equipment (except PTE

Open the catalog to page 1

EUROFAULT SOFTWARE DESCRIPTION EUROFAULT software has been designed for capturing and playing-back any COMTRADE files of faults either simulated or calculated. EUROFAULT software plays back the COMTRADE files, so that the test set plays back the fault exactly as it occurred. Furthermore, enables interpolation of the waveform to a greater number of samples that smooth the waveform closer to reality. An elimination of non-relevant cycles can be made too so that we only play back what caused the relay to trip or block, etc. WINDOWS Based, the software along with many other features is very user-friendly....

Open the catalog to page 2

m CUIIn rAULT Vei 0 0 IEUF1Q FAULT Preview wj t*. Harmeritit

Open the catalog to page 3

CONTROL PANEL Connecting the software to the equipment we can play back the COMTRADE file with the desired modifications. We only need to enter the current and voltage transformers ratios so that we proceed with the secondary injection through the equipment. EUROSMC, S.A. Polígono Industrial P-29, Calle Buril, 69. 28400 Collado-Villalba. Madrid (Spain). Tels: 34 - 91 - 849 89 80*. Fax: 34 - 91 - 851 25 53 www.eurosmc.com • e-mail: [email protected] Please note: Due to the continuous research and development by EUROSMC, specifications in this catalog may be changed without previous notice. EUROFAULT...

Open the catalog to page 4

All EUROSMC catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list