Dispenser
13Pages

DISPENSER FOR MONOCOMPONENT AND BI-COMPONENT GLUES

EURO POUURETANI FOR MONO COMPONENT Europoliuretani is able to offer a wide range of dispensers for the application of polyurethane glue. Our strength lies in the ability to design for our customers tailor-made dispensers that satisfy a wide variety of requirements; in fact each distributor has been designed for both manual and automated use suitable for application within a robotised system. Each dispenser has a range of technological characteristics to offer a specific system suitable for the purpose of use, while maintaining simplicity of use in applying glue to the product.

EUROS POUURETANI 1K BASIC CHARACTERISTICS MONOCOMPONENT GLUES POLYURETHANE GLUE DISPENSER • Chemical packaging capacity: 20 litres or 50 litres. • Drum change: manual with pump lifting and suction pipe. • Chemical suitable for the system: with or without additives. For the diaphragm pump the viscosity of the product can be up to 5000 cps, and for the piston pump even over 5000 cps. • Drum pipes and housing: heated. • Pump: diaphragm or piston. • Flow rate up to 25 l/min (depending on the viscosity of the product). • Temperature control/setting: by means of temperature controllers. • Flow...

MONOCOMPONENT GLUES POLYURETHANE GLUE DISPENSER TECHNICAL ASPECTS The 1K Basic PLUS dispenser model with respect • Chemical packaging capacity: 50 litres, 200 litres. The system consists of a carbon steel frame to the 1K Basic model allows the use of 200 litres. • Drum change: manual with suction pipe lifting. in which both the pumping system and its barrel/drum This system has been designed for the use of two packs • Chemical suitable for the system: with or without of chemical product are housed, together with with very different capacities (50 litres and 200 litres) additives. For the...

MONOCOMPONENT GLUES POLYURETHANE GLUE DISPENSER TECHNICAL ASPECTS The 1K EVO dispenser model is an evolution of the 1K BASIC • Chemical packaging capacity: 50 litres, 200 litres. PLUS dispenser, and now presents many additional features • Drum change: automatic lifting of the pump that allow the use of glues with additives and more precision • Chemical suitable for the system: with and without with pneumatic column piston. additives for both types of pumps. • Drum pipes and housing: heated. • Pump: gear driven by an electric motor (with flow rate of up to 5 l/min) or piston motor (up to 25...

EUROS POUURETAM^ 1KIBC CHARACTERISTICS MONOCOMPONENT GLUES POLYURETHANE GLUE DISPENSER The 1K IBC dispenser for monocomponent glues, with a capacity of 1000 litres of the chemical product, is suitable for operators in sectors where a large quantity of the product is required. Generally this type of system is combined with automated systems for application of the glue. • Chemical packaging capacity: 1000 litres. • Chemical suitable for the system: with and without additives. • Piping: heated. • Cube housing base: with containment basin. • Pump: geared with electric motor. • Flow rate on...

1K DISPENSER FOR MONOCOMPONENT GLUES DISPENSING GUNS FOR 1K DISPENSER Each monocomponent glue dispenser is supplied with a standard gun that can be replaced with other models on customer request. The choice is mainly made considering the type of work, its grinding wheel and any combined system. Ergonomics, weight, duration and type of system are the characteristics that vary from one to another. Standard dispenser DISPENSER FOR BI-COMPONENT GLUES The standard dispenser is undoubtedly the lightest and most agile dispenser; periodically it requires replacement of the gaskets. The magnet...

BI-COMPONENT GLUES POLYURETHANE GLUE DISPENSER EUROS POUURETANI SERIE 30 / SERIE 100 The 2K dispensers are built in a solid carbon steel frame, on which components of internationally recognised high quality brands are installed: SIEMENS, BUCHER, WIKA, KELLER, PEPPERL + FUCHS etc. The 2K dispenser can be configured with 30- or 100- litre tanks and can mix components either with or without additives. If the additives contained within the components are abrasive, Europoliuretani is able to provide a special treatment to the pump to prolong its life. • Chemical packaging capacity: 30 or 100...

SYSTEMS FOR POLYURETHANE GLUES EXAMPLE OF APPLICATION WITH CUSTOM ROBOT MANUAL SPREADING The operator will place the large panel on a mobile carriage and position it easily at “point 0” to begin both the use of dispensers with “comb” , which allow the shape of the panel, either linear or arched. the glue to be distributed homogeneously over the The robot moves along both the horizontal and vertical entire surface, and dispensers “without comb”. axis, to follow the progress of the panel, either flat The comb dispenser can be assembled/removed easily adaptability to all types of panels. The...

PHASE 1 SURFACE ANALYSIS ANALYSIS OF THE SURFACES TO BE GLUED TO IDENTIFY THE TYPE OF ADHESIVE THAT IS MOST SUITABLE The evident characteristics of tenacity and resistance and its simple use allow the use of polyurethane glue in many sectors. For cold application mono- and by-component adhesives are available, both diluted in solvents and mostly with 100% of solid content (without VOC - volatile organic compounds). The SUPRAFIX range of Europoliuretani proposes several mono- and bicomponent polyurethane glues. SUPRAFIX is based on compounds capable of firmly bonding different materials....

PHASE 2 PHASE 3ADHESIVE CONSISTENCY SURFACE ANALYSIS EUROS POUURETANI CHOICE OF THE CONSISTENCY OF THE ADHESIVE BASED ON THE APPLICATION PROCESS LOW VISCOSITY ADHESIVE (25°C) The adhesive has a fluid/liquid consistency, is easy to distribute and is suitable for both casting and spray applications. It is used above all in the case of gluing of not particularly absorbent surfaces as they are not very permeable and require a more fluid glue to better penetrate inside the surface and to thus obtain a better grip. Elasticity and transparency are the characteristics of a low-viscosity adhesive. •...