TECHNICAL DATA SHEET SINGLE USE RESPIRATOR - PROTECTS AGAINST SOLID & LIQUID PARTICLES INCLUDING OIL BASED MISTS APPLICATIONS Construction (Silica dust, MDF, Fibreglass, concrete products) Waste management, Recycling industries Protects against Soft Wood Dust, Aluminium, Gypsum, Graphite, Magnesium Oxide, Platinum, Coal and many other general hazards. RESPAIR P3V FOLD FLAT DISPOSABLE RESPIRATOR MADE IN THE UK TECHNICAL SPECIFICATION • Lightweight -21g • Multi layered filter medium combining electrostatic charge • Ergonomically shaped for comfort and ease of use • Adjustable head straps to provide individual fit • Adjustable nose clip to ensure good seal around nose • Colour coded for ease of identification • Individually packed complete with instructions for use • Conforms to the European approved standard EN149:2001+A1:2009 • Non-allergenic • Exhalation Valve added for easier breathing EN149:2001+A1:2009 FFP3 (NR) a protection factor of 20 x A.P.F. (Assigned Protection Factor) and 50 x N.P.F. (Nominal Protection Factor) USAGE RESPAIR 3V can be used in atmospheres containing particulates as defined in the current H.S.E. document EH40 to provide a level of protection of 20 x A.P.F. and 50 x N.P.F. UNIQUE FILTER MATERIAL The unique filter material provides an extremely low breathing resistance, and far exceeds the performance required by EN149:2001+A1:2009. ERGONOMICALLY DESIGNED Allows freedom of speech, an easy fit minimising leakage providing a high level of protection and comfort plus complete compatibility with all other forms of protective equipment giving an especially clear field of vision. EXHALATION VALVE Minimises heat build up, and allows breathing to be cooler. Respair, Unit B, Carterton Industrial Estate, Carterton, Oxfordshire. OX18 3EZ Call: +44 (0) 1993 840606 Email: [email protected] Visit:

TECHNICAL DATA SHEET FITTING INSTRUCTIONS 1. Hold the mask firmly and place the bottom headband over the head to the nape of the neck. 2. Place the mask under the chin, then over the nose, putting the top head band over the crown of the head. 3. Ensure a good fit by pulling back the side clips on to the face and adjust for comfort. 4. Ensure that the nose clip is moulded around the nose securely. FIT CHECK Check the fit of the mask by covering with both hands and exhale vigorously. Any leaks around the face seal must be eliminated before entering contaminated area. 3. Suitable for use against...