TECHNICAL DATA SHEET SINGLE USE RESPIRATOR - PROTECTS AGAINST SOLID & LIQUID PARTICLES INCLUDING OIL BASED MISTS APPLICATIONS Farming, Insulation Contractors, Woodworking, Remedial work, Grain / Flour production, etc. Protects against Wood Dust, Aluminium, Gypsum, Graphite, Magnesium Oxide, Platinum, Coal, Lead, Chrome, Welding Fumes, and many other general hazards. RESPAIR P2 FOLD FLAT DISPOSABLE RESPIRATOR MADE IN THE UK TECHNICAL SPECIFICATION • Lightweight - 16g • Multi layered filter medium combining electrostatic charge • Ergonomically shaped for comfort and ease of use • Adjustable head straps to provide individual fit • Adjustable nose clip to ensure good seal around nose • Colour coded for ease of identification • Individually packed complete with instructions for use • Conforms to the European approved standard EN149:2001+A1:2009 • Non-allergenic EN149:2001+A1:2009 FFP2 (NR) provides a protection factor of 10 x A.P.F. (Assigned Protection Factor) and 12 x N.P.F. (Nominal Protection Factor) USAGE RESPAIR 2 can be used in atmospheres containing particulates as defined in the current H.S.E. document EH40 to provide a level of protection of 10 x A.P.F. and 12 x N.P.F. If there is a requirement for a higher level of protection the next level is FFP3 providing a protection of 20 x A.P.F, and 50 x N.P.F. UNIQUE FILTER MATERIAL The unique filter material provides an extremely low breathing resistance, and far exceeds the performance required by EN149:2001+A1:2009. ERGONOMICALLY DESIGNED Allows freedom of speech, an easy fit minimising leakage providing a high level of protection and comfort plus complete compatibility with all other forms of protective equipment giving an especially clear field of vision. Respair, Unit B, Carterton Industrial Estate, Carterton, Oxfordshire. OX18 3EZ Call: +44 (0) 1993 840606 Email: [email protected] Visit: ww

TECHNICAL DATA SHEET FITTING INSTRUCTIONS 1. Hold the mask firmly and place the bottom headband over the head to the nape of the neck. 2. Place the mask under the chin, then over the nose, putting the top head band over the crown of the head. 3. Ensure a good fit by pulling back the side clips on to the face and adjust for comfort. 4. Ensure that the nose clip is moulded around the nose securely. FIT CHECK Check the fit of the mask by covering with both hands and exhale vigorously. Any leaks around the face seal must be eliminated before entering contaminated area. 3. Suitable for use against...