TECHNICAL DATA SHEET RE5B4IR TECHNICAL DATA SHEET RE5B4IR MOULDED DISPOSABLE DUST MASK CONFORMITY Meets the FFP1 requirements of EN149:2001 +A1:2009. EC Certificate Number 505403, issued by BSi Product Certification. Product Certification, in accordance with the PPE Directive 89/686/EEC. PERFORMANCE Offers an assigned protection factor (APF) of 4 x Occupational Exposure Standard (OES) for fine toxic dusts, fibres, fumes and mists. MARKINGS EN149: 2001+A1:2009 FFP1 (NR) MATERIALS Man made fibres. Polypropylene co-polymer exhalation valve with rubber diaphragm. INSTRUCTIONS FOR USE Mask must be fitted in accordance with the instructions supplied. Care must be taken to ensure that the correct mask type is selected for the work to be carried out. If in doubt as to the type of mask required seek professional advice. LIMITATIONS OF USE Protection will only be offered if the mask is fitted correctly. The mask must be discarded and replaced if it is a). Removed whilst in the contaminated area, b). Breathing difficulties due to clogging are experienced or, c). The mask becomes damaged. The mask, when in contact with the skin may cause allergic reactions to susceptible individuals. If this occurs leave the hazard area, remove mask and seek medical advice. NOTES • Use in well ventilated areas only, which are not deficient in oxygen and do not contain explosive atmospheres. • This mask is not designed to be worn by people with facial hair. CLEANING & MAINTENANCE Not applicable - disposable product. Store the masks out of direct sunlight away from chemicals and in a dry atmosphere. St EUROPA SAFETY PRODUCTS Call: +44 (0)1296 434334 Email: [email protected] Visit: www.respair.co.uk 66 Edison Road, Rabans Lane Industrial Estate, Aylesbury, Bucks. HP19 8TE

TECHNICAL DATA SHEET FITTING INSTRUCTIONS 1. Hold the mask firmly and place the bottom headband over the head to the nape of the neck. 2. Place the mask under the chin, then over the nose, putting the top head band over the crown of the head. 3. Ensure that the nose clip is moulded around the nose securely. FIT CHECK Check the fit of the mask by covering with both hands and exhale vigorously. Any leaks around the face seal must be eliminated before entering contaminated area. Suitable for use against solid and liquid particulates including oil based mists. 2. This product does not protect against...