DISPOSABLE RESPIRATORS TECHNICAL DATA SHEET RESPAIR ® MODEL X P3V WELDAIR Protects against very fine particles and liquid aerosols, such as fumes, including welding and ferrous metal fume, very fine dusts, fibres, mists and other particulate hazards. Mask features a charcoal filter for relief from nuisance odours and an exhalation valve for easier breathing. APPLICATIONS: General welding practices, MIG and TIG welding, and other particulate applications with nuisance odour. PROTECTION: 50 x N.P.F. (EN529) Applications & Usage Ergonomically Designed General welding practices, MIG and TIG welding, and other particulate applications with nuisance odour. RESPAIR MODEL X P3V can be used in atmospheres containing particulates as defined in the current HSE document EH40 to provide a level of protection of 20 x UK A.P.F. and 50 x N.P.F. Allows freedom of movement and easier communication, an easy fit minimising leakage providing a high level of protection and comfort plus complete compatibility with all other forms of protective equipment giving an especially clear field of vision. Technical Specification • • • • • • Lightweight - 18g Filters 99% of airborne particulates Multi-layered filter medium combining electrostatic charge Ergonomically shaped for comfort and ease of use Adjustable head straps to provide individual fit Individually packed complete with instructions for use EN149 FFP3 provides a protection factor of 20 x UK A.P.F. (Assigned Protection Factor) and 50 x N.P.F. (Nominal Protection Factor) Unique Filter Material The unique filter material provides an extremely low breathing resistance, and far exceeds the performance required by EN149:2001+A1:2009. Mask must be fitted in accordance with the instructions supplied. Care must be taken to ensure that the correct mask type is selected for the work to be carried out. If in doubt as to the type of mask required seek professional advice. Limitations of Use Protection will only be offered if the mask is fitted correctly. The mask must be discarded and replaced if it is a). Removed whilst in the contaminated area, b). Breathing difficulties due to clogging are experienced or, c). The mask becomes damaged. The mask, when in contact with the skin may cause allergic reactions to susceptible individuals. If this occurs leave the hazard area, remove mask and seek medical advice. Respair® Technology Centre, Carterton Unit B, Carterton Industrial Estate, Carterton, Oxfordshire. OX18 3EZ Copyright © 2020-2021. JSP Ltd. All Righ

Fitting Instructions 1. Carefully unwrap mask. 2. Place the bottom headband over the head to the nape of the neck. 3. Place the mask under the chin, then over the nose. 4. Pull the top head band over the crown of the head. 5. Using both hands mould the nose band to the shape of your nose, do not pinch the nose band as this could create a break in the seal. 6. Adjust the straps to ensure a comfortable secure fit. Face Fit Testing As part of our service we offer qualitative test kits, provide qualitative & quantitative face fit testing, and can train individuals to become competent fit testers....