AGDS 50 disengage

Product catalog summary

Description: The AGDS 50 is a disengagement device designed for applications requiring temporary separation between a driving and driven shaft. This is achieved through a splined coupling actuated by a hydraulic piston against springs. Engagement occurs by applying pressure to the piston to counteract the springs.

Specifications: The device includes radial holes for fluid circulation for flushing/cooling. State changes must occur at zero rotation speed and no torque. Without pressure in the pilot port, the system remains disengaged. Suitable hydraulic fluids include high-quality mineral oils or fire-resistant fluids with similar lubrication properties. Viscosity range is 20 to 80 cSt, with a filtration requirement of 50 microns or better. Operating temperature ranges from -10°C to +90°C, with a recommended range of +10°C to +60°C. The drive is direct and coaxial via a splined shaft.

Technical Characteristics: Maximum continuous torque is 1000 Nm, with a peak torque of 1250 Nm. Engage pressure ranges from >30 to <250 bar, while disengage pressure is <10 bar. Allowed pressure in the case is <1 bar. The dry weight is 7 kg, and the rotation direction is bidirectional. The speed with activated engagement is 500 rpm, and without activated engagement, it is 3000 rpm. Radial and axial loads on the shafts are not allowed.

Components: The document lists various components with their part numbers and descriptions, such as disengagement body, retaining rings, sliding engagement, piston, springs, and seals.

Additional Information: The data in the catalogue are indicative and may change without notice. The document provides contact information and directions to Euromat Srl's head office and warehouse in Italy.

Catalog excerpts

AGDS 50 disengage Disinnesto AGDS 50 Technical catalogue Catalogo tecnico

Open the catalog to page 1

AGDS 50 disengages - Disinnesti AGDS 50 Descrip on The product AGDS 50 is a disengage that can be installed on all those applica ons that require a momentary separa on between a driving sha and a driven sha . Such disengagement occurs through the sliding of a splined coupling actuated by a hydraulic piston opposed to several springs. The movement of the joint, with consequent engagement of the sha s, is given by the pressure applied to the internal piston to push the thrust of the springs. Descrizione Il prodo o AGDS 50 è un disinnesto che può essere installato su tu e quelle applicazioni che...

Open the catalog to page 3

AGDS 50 disengages - Disinnesti AGDS 50 main technical data Hydraulic ﬂuids: an wear high quality mineral Fluidi idraulici consen oils or ﬁre resistant ﬂuid having with same qualità o ﬂuidi ininﬁammabili, purchè abbiano analoghe proprietà lubriﬁcan . Viscosity range (with mineral oil): 20 to 80 cSt. Campo di viscosità (per olio min.): da 20 a 80 cSt. Filtra on: 50 micron absolute or be er. Grado di ﬁltrazione: 50 micron assol. o migliore. Opera ng temperature (with mineral oil): : olio minerale di buona Temperatura di esercizio (con olio minerale): Drive: direct and coaxial by means of splined...

Open the catalog to page 4

AGDS 50 disengages - Disinnesti AGDS 50 dimensioni d’installazione ordering code codice d’ordinazione AGDS 50 A2‐6B A2‐14 / # …. further op ons altre opzioni model modello seal op ons opzioni tenute omit for NBR seals ome ere per tenute in NBR nominal size taglia nominale input connec on (ﬂange /sha ) a acco di entrata (ﬂangia / albero) output connec on (ﬂange /sha ) a acco di us

Open the catalog to page 5

AGDS 50 disengages - Disinnesti AGDS 50 codici delle par del freno id. codes of the brake components Original language descrip on / Descrizione ar colo Corpo disinnesto Anello d'arresto E45 Anello 45x55 Innesto scorrevole Ø58 An estrusore 2.18 X 67.13 Rif. 8‐146 90 Sh OR Ø2.62 x Øi66.34 (rif. 2‐146) Pistone Ø88 OR Øc 1.78 x Øi 82.27 (Rif. 2.042) Molla a tazza 80x41x3 DIN2093 ViTCEI M12 x 50 12.9 Paraolio BABSL 35x50x7 NBR Albero a innesto 25x22 din 5482 Anello d'arresto E35 Coperchio disinnesto Cuscine o a sfere 35x62x14 (Rif. 6007) Seeger I62 DIN 472 ViTE M8 x 25 8.8 Rose a Ø9xØ28 sp.3 ISO 7094...

Open the catalog to page 6

Sede legale ‐ Head oﬃce Euromat Srl Via Mestre, 61 41125 ‐ Modena (MO) ‐ Italy P.Iva & C.F. IT02647450366 Sede opera va ‐ Warehouse Euromat Srl Via A. Vivaldi, 151 41019 Soliera (MO) ‐ Italy tel.: +39 059.567.158 fax.: +39 059.857.7308 [email protected] www.euromatsrl.eu Coords. 44.725587, 10.915798 Come arrivare: Autostrada A1 ‐ Uscita MODENA NORD Tangenziale verso Bologna Uscita 4 verso Carpi Seguire indicazioni per Soliera Find us: Highway A1 ‐ Exit MODENA NORD Rin

Open the catalog to page 8

AGDS 50 disengage

AGDS 50 disengage

Catalog excerpts

All EUROMAT SRL catalogs and technical brochures