sheet metal working center general catalogue euromac sheet metal working center

Punching, forming, bending, threading, beading. Sheet metal working center. Euromac evolves the concept of the punching machine with a new generation of genuine sheet metal working centres. Unbeatable versatility and a vast range of machining processes compared to laser machines.

euromac sheet metal working center

MUCH MORE THAN JUST A PUNCHING MACHINE New monoblock frame in Meehanite® Increases productivity and reliability greater strength and stability with twin motors on Y axis (STX) which assures: + 30% Volume +30% Speed +50% Acceleration. Precision and stability. Your best guarantees Designed by FEM (Finite Element Method), it provides resistance of 700N/mm2 with an increase in size that enables the machine to operate at higher speeds with greater stability and thus machining precision. The head is directly built into the monoblock. Thanks to the more stable frame, machining and handling speeds can...

Maximum machining flexibility FieX. hybrid FLEX Hybrid System Which is better, Electric or Hydraulic? Why not get the best of both? Our unique hybrid system, which we call FLEX, is patented and combines the power of hydraulics with the precision and speed of electronic control. And it combines this with energy saving: rated at just 8.5 kW, it achieves average consumption of a mere 4.5 kW/hour when punching. Apart from setting the stroke of every punch, with the FLEX system you can also control: - Hit rate from 10 to 2000 Hits/min - Acceleration/Deceleration of ram movement - Dwell time Thanks...

Speed, stability and precision The Y axis is driven by two motors for higher speed and acceleration combined with outstanding machining precision. +30% volume +30% speed +50% acceleration STX meets the demand for a high-performance, high-output machine able to optimise operating costs. Thanks to the more stable “Y” axis, machining and handling speeds can be increased even on large, heavy sheet sizes. The STX series is available with full optionals: X axis up to 2500 mm, loading and unloading, vacuum, side chute door with part sensor, combined brush and ball tables and automatic hydraulic third clamp....

Side chute door with part sensor Eliminate micro-joints and reduce labour costs and secondary procedures with the automatic side chute door. With this innovative unloading system, finished parts of up to 1250x1000 or 1500x1000 mm (depending on machine throat size) can be discharged with no operator action). Available for STX and MTX plus. euromac sheet metal working center

Some examples from a vast array of configurations.

Speed, stability, extreme flexibility and precision The frame of the MTX plus is a Meehanite® nodular cast iron monoblock resistant to 700N/mm2, designed by FEM (finite element method). The punching head is directly built into the monoblock frame. In practical terms, like all the other new punching machines, the MTX has a more robust (no welding points), reliable, precise frame which is also particularly compact, using less floor space and ensuring impressive flexibility in loading different sheet sizes. What’s more, thanks to the Flex system, the MTX can punch at high speed while maintaining...

Upforming System The 6 B stations of the MTX FLEX 12 turret feature retractable dies for more forming flexibility. Standard thick turrettooling forming tools usually have an “active” die. These dies protrude a few millimeters over the normal height of a standard punch die, requiring special attention to setup and programming. All additional 6 B-Stations of the MTX FLEX 12 can be raised up to 6 mm only when the tool is actually employed and lowered when it is passive eliminating any restriction. FORMING TOOL euromac sheet metal working center

Some examples from a vast array of configurations. 15 Tools 12 Indexed tools 3 Fixed tools 23 Tools 20 Indexed tools 3 Fixed tools 27 Tools 24 Indexed tools 3 Fixed tools

Strong, affordable, easy, fast and more ... The frame of the MBX plus is a Meehanite® nodular cast iron monoblock resistant to 700N/mm2, designed by FEM (finite element method). It is a high-performance hydraulic machine with the same high-speed axis travel as the MTX plus, achieving a hit rate of 600 per minute. It has some of the key features of Euromac Punching Machines, such as the capability for forming, beading and notching. The MBX plus can also be equipped with up to 60 tools, 30 of them indexed. Autoindex System The direct drive tool rotation in the EUROMAC AutoIndex stations uses fewer mechanical...

Vacuum system Our vacuum system prevents scraps from remaining on the sheet, potentially damaging its surface and sometimes even the tool itself. Strongly recommended when processing thin materials, material with protective film or aluminium in general. Optional on all models. euromac sheet metal working center

AUTOMATIC LOADING/ UNLOADING SYSTEM Flexibility and productivity, all in one With its unique, compact, rugged design, the Euromac automatic loading/ unloading system, is available on all punching machine models (except the BX) and can be shipped fully assembled: installation at the customer’s site is quick and easy and the system is ready to go into production within just a few hours. Loading and unloading capacity Easy loading of material for machining and unloading of finished parts generates much higher productivity for you. Machining capability As for all Euromac products, flexibility is key:...

Loading Max. load (kg) 3000 Max. height (mm) 300 Adjustable suction cup layout YES Manual loading is still possible to speed up production of small parts or batches. Unloading Max. load (kg) 3000 Max. height (mm) 400 In combination with machines with side chute door, two additional unloading points are provided: 1) up to max part size 200x200 mm 2) up to max part size 1500x1000 mm depending on machine throat size. euromac sheet metal working center

machine range All Euromac machines comply with the latest EC regulations