Pneumatic slide unit S.USP.150 Pneumatically operated unit suitable for "F.27 - F.31 - F.34" series motorized spindle head. 4 ball rows pads linear bearing. S.USP.150 slide units are used for transfering a part or one operating unit. Feed is provided by a pneumatic cylinder fitted with a magnetic piston. Sensors positioned on the cylinder casing to monitor stroke front and rear ends. Adjustable mechanical stop at front end. Pneumatic dampers at stroke ends (front and rear). A longer stroke (within 200 mm) can be supplied on request. 130 G1/2" Pneumatic cylinder Ø100 stroke 150 Sensor Mechanical stop

Pneumatic slide unit ACCESSORIES NECESSARY COMPONENTS 2 OFF STROKE ENDS SENSORS WITH 2.5 METRE CABLE ROLLER CIRCULATION RAILS/PADS ELECTRO-PNEUMATIC DIAGRAM A = 1/2" BSP forward B = 1/2" BSP return C = stroke D = 44 mm damping E = damping adjustment F = 1/2" BSP flow regulator G = 1/2" BSP F.R.L H = proximity switches EV1 = 1/2" BSP solenoid valve UP SIDE DOWN UTILIZATION In case larger spindle head mounting surface is required it is advisable to turn the slide unit up side down. In this way, the linear bearing and slide ways are sheltered. Forward sect. area cm2 Return sect. area cm2 LOADING...