Ball screw slide unit S.TV.201 - S.TV.301 S.TV.401 - S.TV.601 Ball screw slide unit S.TV is suitable for F.40 - F.50 - F.55 series motorized spindle heads. Linear bearings with 4 ball rows pads. Feed is provided by a rolled, precision 40 mm dia. x 5 mm pitch ball screw pre-loaded at "0" backlash. A 3 contacts switch pack is included and can be fitted to right or left side of the slide with relative cams. Feed motor mounting facility must be considered, suitable for the brushless motor that you will specify (supplied on request). Slide units fitted with 6 ball rows pads, or roller pads for heavy duty applications can be supplied on request.

Ball screw slide unit NECESSARY COMPONENTS IN LINE FEED MOTOR MOUNTING PROVISION BELLOW TYPE COVER TELESCOPIC GUIDE COVER OFF SET FEED MOTOR MOUNTING PROVISION ROLLER CIRCULATING RAILS/PADS UP SIDE DOWN UTILIZATION FEED MOTOR MOUNTING FACILITY N°4 M10x22 In case a larger spindle head mounting surface is required it is advisable to turn the slide unit up side down. In this way, the ball screw, linear bearings and slide ways are sheltered. P.N. In this case, the supplementary plate must be ordered. TECHNICAL FEATURES Max. axial thrust on the screw N Ball screw feed version LOADING CAPACITY STATIC...