TliF PRO/&ACO COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV GL s|SO 9001 - COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV GL = ISO 9001 -

MADE IN ITALY The handrail system components are manufactured with the pultrusion process (raw materials pulled through a resin bath and pre forming die) and contain up to 70% fiberglass which guarantees remarkable mechanical properties. The internal composition of continuous directional glass fibers, determines an exceptional resistance to impact and fatigue (permanent deformations do not occur in case of accidental over load). Lightweight and very easy to install, Eurograte® handrail systems are an economical choice as painting is not required and they are virtually maintenance free. The concept...

COMPLIES TO EN 14122-3 NORMATIVE When the height of a possible fall exceeds 500 mm, a guardrail must be installed. The minimum height of the guardrail shall be 1100 mm from the flooring. The guardrail shall include at least one intermediate knee rail. The clear opening between horizontal elements shall not exceed 500 mm. A toe-plate shall be placed 10 mm maximum from the walking level. The distance between the axes of the vertical posts shall be limited to 1500 mm maximum. Standard resin: Polyester Isophthalic. Standard colours: Safety yellow or Grey (other colours on demand). MARKET SECTORS:...

Ergonomic handrail Knee rail Kick plate Ergonomic handrail Knee rail Ribbed kick plate Square beam (post) Rectangular base 2 holes Trapezoidal base 3 holes Reinforcement insert Swivel connection Swivel connection Ergonomic handrail Knee rail Ergonomic handrail Knee rail Kick plate Swivel connection Ergonomic handrail Swivel connection Knee rail

STANDARD MODULES Square post Ergonomic handrail Ribbed kickplate Square post Square post Variable Variable Ergonomic handrail Ergonomic handrail Square post Ribbed kickplate kickplate Ribbed Knee rail ØKnee rail Ø 26mm 26mm Ergonomic handrail Ribbed kickplate Eurograte Support beam Eurograte Support beam Support beam Reinforced insert Reinforced insert Reinforced insert Eurograte Support beam Reinforced insert Knee rail Ø 26mm Ribbed kickplate Ribbed kickplate Eurograte Support beam Eurograte Reinforced insert Support beam Reinforced insert Support beam Reinforced insert Eurograte Support beam...

TYPICAL FIXING Channel beam fixing I-beam & wide flange beam fixing Sq. tube post Sq. tube post tube post Sq. M10 M10 / M12M10 / M12 / M12 Bolt assembly Bolt assembly Bolt assembly Bolt assembly Kickplate Kickplate Kickplate Sq. tube spacer Sq. tube s 75 mm min. q. tube post Insert M10 / M12 Bolt assembly assembly Bolt Bolt assembly M12 anchor Bolt assembly 50x5mm 50x5mm 50x5mm Sq. tube posttube post Sq. Sq. tube post Insert Insert M10 / M12 M10 M12 anchor / M12 F.R.P. F.R.P. Grating Concrete Bolt assembly assembly Bolt Bolt Base fixing 50x5mm 50x5mm Base fixing Flooring Sq. tubeSteel plate spacer...

TYPICAL ASSEMBLY Knee rail assembly Kick plate assembly Assembly of kick plate to steel base Custom colors

Eurograte® is a registered mark and manufactured by: ticomm & PROMACO s.r.l. 20064 Gorgonzola (Mi) - ITALY Via Parini, 111/e Tel. +39 02 95091.1 Fax +39 02 9514897 E-mail: [email protected] Internet: www.eurograte.com