COOLERS EURODIFROID
28Pages

ECH-ECHH End line chillers For water or emulsion (ECH), or oil (ECHH) DESCRIPTION End line chillers ECH (H) have been developed to cool industrial process or machine from an existing cold water loop supply. Compacts regarding floor occupation, they can also be wall mounted. Simple, their toughness gives them a long lifetime. They require few maintenance. An electronic thermostat with digital display available on the front panel allows the user to know at any time process' temperature, set in factory, access to operating point is also very easy. CONSTRUCTION End line chillers ECH(H) are made of a tank, a pump for fluid circulation and a heat exchanger. The frame is galvanized steel black painted and the cover is also a galvanized steel painted in RAL7032 and easily removable. Fluid connections are on the side. ALTERNATIVES Three different types can be performed : • Standard : with tank and pump • DP : without tank, with pump •D : without tank, without pump STANDARD EQUIPMENT OPTIONS • • • • • • • • • • • • • • Plate heat exchanger • Electronic thermostat • 3 ways valve • Galvanized steel painted frame and cover • Fluid level indicator • Drain valve DIMENSIONS SINGLE PHASE CD HP NO BY(m) HT: RD RAL HART NET F VS BT,HT M : Flow switch : High pressure pump : Electrical level switch : Automatic or manual By-pass : High temperature security : Differential temperature control : Specials colors (RAL) : Industrial connector : Cleanable exchanger : Filter : additional indicator :High/low temp on free voltage contacts : Manometer THREE PHASE * : Drain on standard version * : Secondary circuit inlet on DP version www.eurodifroid.fr 01

TECHNICAL DATAS ECH 70 AWB ECH 70TWB ECHH 70 TWB ECHH 70 TWB DP V-Ph-Hz 230-1-50 400-3-50 400-3-50 400-3-50 W 7500 7500 8500 8500 kcal/h 6450 6450 7300 7300 Electrical power W 400 600 600 600 Nominal current A 1.1 1.6 1.7 1.7 Flow available l/min 5-33 5-33 15 15 Pressure available Bar 0.2-4.2 0.2-4.2 1-15 1-15 Tank l 20 20 20 -Ambient temperature ° C 10-40 10-40 10-40 10-40 Weight kg 60 60 60 60 * For 10°C temperature gap between oulet temperature on secondary circuit and inlet water temperature on primarycircuit, at nominal flow. Supply Cooling power* PERFORMANCE CURVES - SELECTION ECH :...

RFC - RFI water chillers, in conformity to CE standards, can be used to cool process and machines. They can be placed even in small areas, due to their small dimensions. Hydraulical and electrical connections, as well as maintenance have been simplified to the maximum, for easier installation and use. These chillers are standard equipped with insulated tank with cover (easy cleaning) and circulating pump. In order to follow user's needs, many alternatives and options are The range of application's temperature goes from +5°C to +20°C(standard), with possibility to extend it from -30°C to...

KR(N)A Water chillers KR(N)A water chillers, in conformity to CE standard, can be used to cool process and machines. Hydraulic and electrical connections, as well as maintenance have been simplified to the maximum, for easier installation and use. These chillers are standard equipped with insulated tank with cover and circulating pump. In order to follow user's need, many alternatives and The range of application's temperature goes from +10°C to +25°C (standard), with possibility to extend from -30°C to +45°C, Ambient conditions lie between +15°C and +45°C. For specific applications, limits...

TECHNICAL DATAS Power supply Cooling capacity* Total input power Water flow Pressure range Tank volume Noise level** Weight empty Power supply KRA 90 KRNA 120 KRNA 150 KRNA 180 KRNA 200 KRNA 300 Cooling capacity* Total input power Water flow Pressure range Tank volume Noise level** Weight empty *With 10°C outlet water, 32 ambient **Measured at 1 meter distance, 1.6m from floor in free aera

KRNA Water chillers 40-3 300KW DESCRIPTION KRNA industrial chillers meet the need for centralized generation plants in the cold. Their design and use of modern materials in their manufacture can best energy efficiency. Standard equipped with buffer tank and pumps, made to be installed outdoors or indoors, the proposed alternatives are expanding their scope ( (heavy industry, mechanical engineering, cosmetics, plastics, chemicals, etc ...) , KRNA 400-500 KRNA 600 à 900 KRNA 1100-1550 KRNA 1850 KRNA 2400 à 3000 STANDARD EQUIPMENT 2 Refrigerant circuits a part of KRNA 600 Scroll compressor...

TECHNICAL DATAS _KRNA 1200 KRNA 1400 KRNA 1550 KRNA 1850 KRNA 2400 KRNA 2700 KRNA 3000 *With 10°C outlet water, 32 ambient **Measured at 1 meter distance, 1.6m from floor in free aera

COOLING TOWERS EURODIFROID These cooling towers manufactured by DECSA*, covers a large range of applications in industry and air conditioning area. Thanks to our technical service’s skills and tools, we have opportunity to answer with the most adapted solution in accordance to your process. OPEN TOWERS Hot water coming from refreshed plant enters by (1) and circulates in distribution piping (2). Then, water is pulverized in droplets thanks to nozzles (3). These droplets stream along the exchanger (4) ; this one has a very large exchange surface in order to improve evaporating ratio....

OPEN TOWERS Open tower made with reinforced protection galvanized iron Helicoids fans Cooling capacity from 500 to 8 664 kW Stainless steel option Open tower made with reinforced protection galvanized iron Cooling capacity from 90 to 4 467 kW Stainless steel water filter Noise sound filter Reinforced polyester open cooling tower Cooling capacity from 109 to 8 445 kW Galvanized steel structure Option without basin Inspection and maintenance large holes Water 2 speeds motor option CLOSED CIRCUIT TOWERS Closed circuit tower made with reinforced protection galvanized iron Helicoids fans Cooling...

RFCH - RFIH Oil chillers Developed with the specific "MODULE FROID" technology and strongly approved by RFC and RFI , these units can be used to cool process and machines that using soluble or full oils. Their conception's modularity and their several available options allow them to adapt to most of needs Electro spindles Hydraulic units Filtration units Machine tools gear boxes Hudraulic press STANDARD EQUIPMENT RFCH - RFIH Hermetic compressor. Stainless steel plate brazed heat exchanger. Automatic or thermostatic expansion valve (differential temperature control). Insulated tank. Gear...