THE COOLEST SOLUTIONS YOU NEED

THE IMPORTANCE OF COOLING IN PLASTICS PROCESSES The design of the cooling system is very important in plastics processes. Since the cooling time accounts for about 40% ~ 60% of the whole molding cycle, SHORTEN THE MOLDING CYCLE TIME good cooling s y stem INCREASE THE PRODUCTION RATE REDUCE COSTS THE FUNDAMENTALS TO DETERMINE THE BEST COOLING SYSTEM TO YOUR NEEDS 1. Know the PROCESS: Knowledge is the base, as every process has its own needs. If you know the process, you cool it and get the best from your production. 2. Know the APPLICATION: Pressures, volumes, ambient conditions, processed materials....

4. Price is important but PRODUCTION is more: Chiller is a small but indispensable part of your line. Think of it: save money and invest in a cooling system which is unable to stand your production is a risk you may accept? If a chiller stops, production stops and downtime costs raise. 5. Think today for TOMORROW: The supply of a cooling system must refer to the customer’s needs and take into consideration his future expansion, allowing the customer to build his system by steps. 6. Save MONEY, reduce ENERGY COSTS, respect the ENVIRONMENT: As the cost of energy is becoming worldwide more and more...

Injection Moulding The injection molding of thermoplastic materials is the most widely used technology in plastics processing. Blow moulding and PET The blowing of hollow bodies (blow molding) is an important method of polymers processing, used for the production of hollow products. Packaging Plastics and packaging are an integral part of everyday life. The production of these materials depends on reliable processes and accurate measurement. Technical Parts The process focuses on mass-producing plastic parts. Shorter cycle times are a must as they mean higher productivity and lower cost per part....

REQUIREMENTS: - Reliability - All-in solution - Save energy and respect the environment REQUIREMENTS: - Accurate temperature control - Shorten the cycle time - High pressures and raised flow rates - Control temperature of moulds using different types of material - Save energy and respect the environment REQUIREMENTS: - Large cooling capacities - Control separately the moulds and the oil temperatures - Glycol-free operation - Save energy and respect the environment REQUIREMENTS: - Accurate temperature control - Combined cooling/heating function - High pressures and raised flow rates - Beside the...

Easy installation Energy savings Possibility to enlarge the system by steps Precise control of temperature (+/- 0,1°C) Energy savings Raised production rate Significant improvement in quality Energy savings Costs reduction in case of no-glycol operation Possibility to enlarge the system by steps Precise control of temperature (+/- 0,1°C) Energy savings Possibility to work with different materials Constant production rate Good quality of the product Respect of the mechanical and of the strength characteristics of the final product Brilliant and more transparent film Bubble stability Significant...

COLLECTION E-SOLUTIONS RELEASE 001/19 - EN Eurochiller Srl reserves the right to modify the data and the informations herein quoted without notice. EUROCHILLER S.r.l. - Via Milano, 69 - 27030 Castello d’Agogna - PV - Italy Tel. +39 0384.298985 - Fax +39 0384.298984 - Service +39 0384.298981 [email protected] www.eurochiller.com