TELETOWER® Instruction and Reference Manual for models TTA02, TTA02TB, TTG02, TTG02TB For use as a TOWER or a PODIUM Seven working heights

INTRODUCTION Thank you for purchasing the TELETOWER®. The TELETOWER® is manufactured in aluminum with an anodised finish. It is built to withstand the toughest handling and working conditions. It is suitable for DIY, trade and professional applications. Spare parts are readily available. You may already be familiar with using similar equipment but the TELETOWER® is unique and we recommend you to take time and read these instructions. They are designed to familiarize you with the features of the system and to ensure you get the very best performance from your purchase. Keep these instructions...

CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Servicing and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 IN...

▲ WARNING For your safety, please read all the safety instructions in this Manual before using the TELETOWER®. Safety and quality is of paramount importance when manufacturing TELETOWER® products. All products meet the requirements of the Work at Height Regulations of 2005. IMPORTANT. Read these instructions before assembling the TELETOWER®. IMPORTANT. Always assemble the TELETOWER® according the instructions given in this Manual and on the labels affixed to the TELETOWER®. SAFETY CONSIDERATIONS General • Do not use the TELETOWER® if it is damaged in any way • Never exceed the maximum load of...

The main features of the TELETOWER® are listed below. • Manufactured in anodised Aluminum (models TTA02 and TTA02TB) • Manufactured in Fibreglass (models TTG02 and TTG02TB) • Can be used as a Tower or a Podium • Has seven working height from 0.33m to 2m • Five-position stabiliser legs with locking castors • Can be erected in less than three minutes by a single person thereby saving down time and man hours • Folds down for ease of transportation and storage • Easily transportable in a small van or estate car thereby reducing fuel costs • Comprises only three parts (main assembly, platform and...

IN THE BOX Carefully remove your TELETOWER® from the box it arrived in. It is recommended that you retain this packaging should the item need to be returned under warranty. EQUIPMENT AND ACCESSORIES SUPPLIED There are four models of the TELETOWER®: TTA02, TTA02TB, TTG02 and TTG02TB . The illustrations below apply to model TTA02TB where 'TB' indicates toe boards are supplied. (1) The main assembly in collapsed form (with folded platform) Four lockable castors with adjustable stabilisers The Instruction and Reference Manual (This publication) Toe boards in carrying case (optional with TTA02 and...

LOCK INDICATOR BUTTONS The red and yellow buttons are used to show that the lock mechanisms are engaged or not when erecting the TELETOWER®. At all height settings, the yellow buttons should always be in the locked position i.e. guard rails should be in place, see page 9. At the 2 metre height setting, all yellow and red buttons should be in their locked position. The locking mechanism of a rung is situated at each end of the rung immediately below it. As a rung is lifted, it automatically locks to the frame when it is in the correct position. When this happens an audible 'click' will be heard....

Fitting the castors To fit the castors carry out the following. 1. Carefully lay the fully collapsed main assembly (without platform) in a horizontal position on the floor or on a bench. Take a castor/stabiliser leg and slide the castor shaft into position on the main assembly. Push the red button on RUNG 9 away from the castor and push the castor shaft fully in and rotate until the castor is adjacent to rung 9. Release the button and if necessary rotate it a little further until you hear the lock-pin click into place, which locks the stabiliser in this position. PART OF FRAME CASTOR RELEASE...

1. ERECTING THE SAFETY CAGE This procedure starts from when the TELETOWER® is in its fully collapsed arrangement, with castors fitted as in Figure 1.1. 1.1 Not locked ADJUSTABLE HAND-RAIL RUNG 1 RUNG 2 RUNG 3 RUNG 4 RUNG 5 RUNG 6 RUNG 7 ADJUSTABLE KNEE-RAIL LOCKING GATE RUNG 9 Ensure the castors are unlocked and the wheels are free to rotate. Release the two fabric straps fastened around the legs of the assembly that hold the two frames together. While keeping the frames together at the back, push the front legs slightly apart as shown in Figure 1.2. Lift and withdraw the folded platform and...

LIFTING Hold both ends of RUNG 1 (Figure 1.3) and place one foot on RUNG 9. Lift RUNG 1 until it locks in place. A click will be heard when it locks and the yellow buttons on RUNG 2 should then be in the locked position. This has lifted the hand guardrail, see Figure 1.3. Locked Locked Click Click Locked Locked Locked Locked Click Click RUNG 2 2 RUNG RUNG 3 3 RUNG RUNG 4 4 RUNG RUNG 5 5 RUNG RUNG 6 6 RUNG RUNG 7 7 RUNG Locked Locked Click Click Click Click Click Click RUNG 3 3 RUNG RUNG 4 4 RUNG RUNG 5 5 RUNG RUNG 6 6 RUNG RUNG 7 7 RUNG LOCKING LOCKING GATE GATE LOCKING LOCKING GATE GATE Now...

FRONT AND REAR RAILS 1. Hold the yellow cover on the end of an upper handrail using your thumb and fingers, and push it towards the end of the rail. Hold it in this position while you lift the end to unfasten it from its anchor point, see Figure 1.5. Rotate the anchor point through 90 degrees to face the opposite side frames, see Figure 1.6. Rotate the rail end towards the opposite frame. Extend the rail until you hear two clicks. This tells you that the 3-part rail has been securely locked in its extended position. Carefully let the rail hang down from the attached end. Note. You should be able...