UK Manufacturer of Aluminium Access Equipment Available in 2 Lengths: 1.8m & 2.5m Double Width (1.45m) The tower comprises the minimum possible multi-purpose components, no separate ladders or guardrail frames are necessary. All frames can be used as uppers or lowers simply brace your platform on the third rung below the top of the tower and the correct guardrail height is achieved. nufacturer of Aluminium Access Equipmei The Euro 500 Alegro Tower conforms and is approved to BS EN 1004 MAX SAFE WORKING LOAD FOR STRUCTURE: 750KG MAX SAFE WORKING LOAD FOR PLATFORM: 250KG

Mobile access working towers may only be assembled and dismantled by persons familiar with these instructions. Do not use any scaffold tower which is damaged, which has not been properly assembled, which is not firm and stable, or which has any missing or damaged parts. Do not assemble a scaffold tower on unstable ground or objects such as loose bricks, boxes or blocks. Only a sound rigid footing must be used. Ensure that the scaffold tower is always level and the adjustable legs are engaged. Check that you have taken all necessary precautions to prevent the tower being moved, or rolling away....

Euro Alegro 500 1.8m & 2.5m Double Width Tower Kit List PLATFORM HEIGHT 1.2m OVERALL TOWER HEIGHT STABILIZERS BASE SET UP You must get your base set up correctly in order to achieve safe guardrail heights. PLATFORM POSITIONS Temporary platforms are used to achieve correct working heights; reposition them when dismantling. ASSEMBLY PICTURES The pictures are for illustrative purposes only. 2 rung base frames build the following towers: 2.2m; 4.2m (shown); 6.2m; 8.2m; 10.2m; 12.2m. PERSONNEL REQUIRED Euro Towers recommend a minimum of 2 people to build this tower system. DISMANTLING NOTES: Remove...

1. Insert the castors into the adjustable legs. Insert 2 legs and castors into each 2 rung frame. 2. Fit one horizontal brace on the plain side of the frames to the vertical of the frames above the 1st rung connecting the 2 frames together. 3. Fit another horizontal brace on the ladder side of the frames face down onto the 1st rung. Note: when standing inside the frames looking at the ladder frame, the ladder should be to the left hand side. 4. Fit the next set of frames onto the base, ladder frames run continuously up the left hand side. Note: see kitting page for frame 5. Add 4 diagonal braces...

EURO 500 DOUBLE WIDTH ASSEMBLY GUIDE 9. Standing on the platform, add a set of 4 rung frames, ladders run in a continuous pattern. 13. Fit the toeboard clips to the rung next to the corners of the platforms and then fit the toeboards as shown. Note: Any gap between the platform board and toeboard must not exceed 25mm. 10. Add diagonal braces continuing the pattern from the previously fitted braces. Note: The odd diagonal brace is fitted to the side nearest the ladder. Repeat steps until working height is achieved. 4 rung bases set up the following towers: 1.2m; 3.2m; 5.2m; 7.2m; 9.2m; 11.2m 11....

For further help, guidance or information on this or other products please contact Euro Towers Limited Unit 5 Edgemead Close, Round Spinney, Northampton, NN3 8RG Tel: 01604 644 774 | Fax: 01604 499 544 [email protected] www.eurotowers.co.uk