ISO 9001:2015 certified Quality Management System RCFE for emulsion - RCFO for oil npli sssfli HSfli'HjiS BgjjSKS Main features Accessories • Available in seven power ratings for oil cooling + seven power ratings for emulsion. • Air condensed. • Direct exchange coaxial evaporator. • High performance rotary vane or scroll compressors with low energy consumption. • Electronic microprocessor thermoregulator for cutting fluid temperature control and display. • Cooler malfunction signals on display. • Low-noise axial fans. • Protective metal frame made of S235 steel painted with epoxy powder and with a semi-gloss textured effect. • Eco-friendly refrigerant gas (HFC). • Cutting fluid circulation pump with special sealing. • Differential electronic thermoregulator equipped with a tenth of a degree resolution ambient sensor. • Pressure gauges on the hydraulic circuit and/or on the cooling circuit. • Caster wheels. • Metal washable air filters for condenser protection. • Cooler remote malfunction signal. • Electric connectors upon client’s request. • Electric connector for cutting fluid circulation with an external pump. • Special power supply voltages. • Configuration for an ambient temperature up to +55°C. • Configuration for an ambient temperature down to -15°C. • Frame available upon request in every type of RAL finish or in polished stainless steel. • Minimum electric water level, with remote alarm. RCF-SD is a new series of Euro Cold coolers designed to cool cutting fluids, cooling and lubricating fluids that contain impurities, even though they have been filtered. Careful design and experimentation allowed us to deploy an innovative solution thanks to a special evaporator: thanks to a wide cross-section, it can cool with direct exchange of the fluid through a cooling gas. The attention placed in the technical solution adopted for this series of machines ensures a considerably lower risk of clogging compared to an ordinary exchanger with braze-welded plates. Its constant top efficiency levels over time ensure greater energy efficiency and reliability, which results in lower potential machine downtime. The new SD series coolers stand out for their compact design and smaller surface area, along with their significantly smaller weight - thanks to the fact that it does not come with the circulation pump we recom mend installing on the filtering system. It can be installed in the cooler upon request. The skills and the experience gained by Euro Cold during its 25 years of experience in the field are at your disposal. Our power is our ability to respond to the needs of mechanical and industrial systems' manufacturers which are rapidly and constantly changing. Do not hesitate to contact us in order that we may provide you with the most adequate solution to your specific temp

Cutting fluid coolersRCFE for emulsion - RCFO for oilTechnical data MODEL Technical drawings available in the DOWNLOAD area of our Web site Weights & dimensions

Cutting fluid coolers RCFE for emulsion - RCFO for oil EURO COLD srl - Via Aldo Moro, 11/E - 41030 Bomporto (MO) Italy - Tel. +39.059.817. 8138 - Fax +39.059.817.0482 www.eurocold.it - [email protected]