Oil coolers ISO 9001:2015 certified Quality Management System Main features Accessories • Available in eight power ratings. • Air condensed. • High performance rotary vane or scroll • compressors with low energy consumption. • Electronic microprocessor thermoregulator for fluid temperature control and display. • Cooler malfunction signal display (an optional feature in the single-phase models). • High efficiency plate heat exchangers. • Low-noise axial fans. • Protective metal frame made of S235 steel painted with epoxy powder and with a semi-gloss textured effect. • Eco-friendly refrigerant gas (HFC). • Standard models without circulation pump and tank, available as optional features upon request. • Screw/gear volumetric pumps, equipped with an electric engine. • Tank equipped with top-up system and sight level indicator. • Differential electronic thermoregulator equipped with a tenth of a degree resolution ambient sensor. • Oil flow switches with fixed settings or settable options and malfunction signal setup. • Oil filter inlet/outlet with visual and/or electrical clogging indicator. • Pressure gauges on the hydraulic circuit and/or the cooler circuit. • Mechanical oil level gauge. • Caster wheels. • Air filter cartridge for condenser protection. • Cooler remote malfunction signal. • Electric connectors upon client's request. • PID control for an improved fluid temperature control, with electronic thermoregulator equipped with Autotuning settings. • Special power supply voltages. • Configuration for an ambient temperature up to +55°C. • Configuration for an ambient temperature down to -15°C. • Frame available upon request in every type of RAL finish or polished stainless steel. Thanks to a wide range of models and accessories, the ACO range is able to offer strongly personalized solutions aimed at Euro Cold coolers' specific industrial application needs. The skills and the experience gained by Euro Cold during its 25 years of experience in the field are at your disposal. Our power is our ability to respond to the needs of mechanical and industrial systems' manufacturers which are rapidly and constantly changing. Do not hesitate to contact us in order that we may provide you with the most adequate solution to your specific&nb

Technical data Notes (*) Reference values: inlet oil +30°C, ambient temperature +32°C (**) Optional feature upon request (***) Standard packaging: cardboard box placed on pallet Cooling capacity data is based on ASHRAE graphs supplied by the compressor manufacturers ISO VG 10-68 oil coolers For cooling different oils, please contact our Engineering Department Maximum temperature of the inlet fluid: +50°C Minimum and maximum ambient temperature: from +10 to +40°C For ambient temperature above +40°C, please contact our Technical Department Minimum and maximum ambient relative humidity (without...

Technical data Notes (*) Reference values: inlet oil +30°C, ambient temperature +32°C (**) Optional feature upon request (***) Standard packaging: cardboard box placed on pallet Cooling capacity data is based on ASHRAE graphs supplied by the compressor manufacturers ISO VG 10-68 oil coolers For cooling different oils, please contact our Engineering Department Maximum temperature of the inlet fluid: +50°C Minimum and maximum ambient temperature: from +10 to +40°C For ambient temperature above +40°C, please contact our Technical Department Minimum and maximum ambient relative humidity (without...