*mydirectindustry

AEROFOIL

Product catalog summary

Company Overview:
Eureka Industrial Equipments Pvt. Ltd. is a certified company with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 17025:2017 certifications. The company operates from multiple locations in Pune and Mumbai, India.

Description:
The Aerofoil is a flow measurement device designed for use in square or rectangular ducts where traditional flow meters are ineffective. It utilizes an aircraft wing-shaped foil to create a pressure drop, allowing for the measurement of flow through differential pressure readings. The device is particularly suited for air and gas flow measurement, offering minimal pressure drop and low permanent pressure loss.

Applications:

Steel Plant
Sugar Industry
Power Plant

Features:

Designed for rectangular duct flow measurement.
Suitable for fluids with minor dust particles.
Requires short upstream and downstream lengths.
Resistant to erosion.
Low maintenance due to no moving parts.
Easy installation with end flanges.

Nominal Sizes Available:
Duct sizes of 500mm and above are available. For smaller sizes, consultation with a Eureka representative is recommended.

Pressure Tapping:
Utilizes throat taps for pressure measurement.

Materials:
Material selection is based on temperature and process conditions, typically using carbon steel such as IS2062 or SA516Gr.60/70.

Construction:
The Aerofoil is constructed with two foils, featuring a smooth upstream profile and a divergent downstream cone. The number of tapping ports is determined by duct size, with HP and LP sensing ports connected to common pipes for measurement.

Catalog excerpts

EUREKA INDUSTRIAL EQUIPMENTS PVT. LTD. REGD. & SALES OFFICE : 17-20, 1st Floor, Royal Chambers, Paud Road, Pune - 411 038, Maharashtra, India. n Tel: : 501, 'J' Block, M.l.D.C., Pimpri, Pune - 411018. MUMBAI OFFICE : Office No.116, Growmore Tower, 1stFloor, Plot No.5, Sector No.2, Kharghar, Navi Mumbai - 410 210 n Mobile: 9322598274 Email: [email protected]

Open the catalog to page 1

DESCRIPTION: Aerofoil is specially designed to measure flow through square/rectangular duct, where other flow meters like orifice, flow nozzle, venturi etc. cannot be used. The name itself explains that, the flow meter uses the Aircraft wing shaped foil obstruction which creates pressure drop. Aerofoil is constructed with at least 02 numbers of foils. The piezometric ring arrangement is connected inside the foil, which gives averaged pressure readings for both HP & LP side. The difference between these two readings will give the DP & in turn the flow reading. Eureka's AF series is suitable for...

Open the catalog to page 2

AEROFOIL

AEROFOIL

Catalog excerpts

All Eureka Industrial Equipments Pvt. Ltd. catalogs and technical brochures