ONE FITS ALL! High locking force in a compact design: The CTS safety switch offers maximum flexibility and makes the perfect addition to the EUCHNER portfolio. The CTS is ideal for applications where a high locking force is required and limited installation space is available. The actuator of the CTS is mounted on a floating bearing, and this gives the switch a high level of tolerance even on large doors. The CTS can also be used in a wide variety of connection designs. A range of options is available from a direct connection to the control system through to a connection via a decentralized fieldbus...

ACTUATOR T he actuator mounted on a floating bearing tolerates vibration and misalignment One actuator for all applications: suitable for both sliding doors and doors with a very small radius igh locking force (Fmax) of 5,000 N and H a compact design Innovative LED concept with RGB LED: a clear diagnostic display, visible from three sides Maximum safety in accordance with EN ISO 13849-1 category 4 /PL e and EN ISO 14119 Two versions available: guard locking based on the open-circuit or closed-circuit current principle Can be connected in series with other EUCHNER devices from the BR system family...

SIMPLE WIRING – THE CTS IS COMPATIBLE WITH ANY MACHINE DESIGN INDIVIDUAL CONNECTION WITH ONE CONNECTING CABLE WITH TWO CONNECTING CABLES SAFETY RELAY A direct connection to the safety evaluation unit with only one cable. Direct connection to decentralized fieldbus modules. SERIES CONNECTION WITH ONE CONNECTING CABLE Cost-effective and time-saving with only one cable. These variants are an ideal solution for series connection. One signal controls the locking function of all the CTS safety switches simultaneously. WITH TWO CONNECTING CABLES For an extended series connection with up to 20 CTS. The...

STAINLESS STEEL CTS – SPECIAL VARIANTS FOR CHALLENGING APPLICATIONS Stainless steel variants of the CTS are ideal for challenging applications in battery cell manufacturing, the semiconductor industry or processes where significant corrosion occurs. All the external metal components of the stainless steel CTS variants are made of alloys with only a very small proportion of copper, nickel and zinc. This prevents a reduction in quality and damage to the battery. The plastic escape release can be easily retrofitted for these applications. BENEFITS FOR YOU aximum safety and reliability for high-end...

Monitoring of GUARD LOCKING HIGH coding level ONE SWITCH – MANY OPTIONS onitoring of guard locking (L) M High coding level (HC) onitoring of the door position (I) M High coding level (HC) onitoring of guard locking (L) M Low coding level (LC) onitoring of the door position (I) M Low coding level (LC) PROTECTING WHOLE BODY ACCESS DOORS P rotection of personnel where a high level of protection against tampering is required High locking force of 3,800 N (Fzh) Readily visible RGB LED for simplified diagnostics Escape release (can be ret

GUARD LOCKING FOR PERSONNEL PROTECTION G Safety outputs react to the status of the guard lock G Protection against over-traveling machine movements G Covered installation: a low coding level is sufficient G Safety outputs react to the door position G Low coding level G No unintentional process interruption G Safety outputs react to the door position G High coding level protects against tampering Q Flexible installation with side mounting and connecting cable with plug connector Monitoring of the DOOR POSITION Monitoring of the DOOR POSITION Monitoring of GUARD LOCKING HIGH coding level LOW coding...

A CLOSE WORKING RELATIONSHIP – LITERALLY! EUCHNER – WHERE YOU ARE EUCHNER GmbH + Co. KG Kohlhammerstraße 16 70771 Leinfelden-Echterdingen I Germany Tel. +49 711 7597-0 I [email protected] www.euchner.com 169642 . 03-10/25 . Subject to technical modifications; no responsibility is accepted for the accuracy of this information. © EUCHNER GmbH + Co. KG