Catalog excerpts
One fits all Safety switch CTS with FlexFunction
Open the catalog to page 1THE SAFETY SWITCH CTS High locking force in a compact design: the safety switch CTS expands the EUCHNER product range between the CTP allround talent and the CTM specialist, combining the best of both worlds while offering maximum flexibility. The CTS is ideal for applications requiring a high locking force in a confined space. n HIGH LOCKING FORCE IN A SMALL PACKAGE Compact switch dimensions (135 x 31 x 31 mm) combined with a high locking force of Fmax 3,900 N enable universal use of the CTS. The CTS can be mounted in three orientations, permitting flexible application for hinged and...
Open the catalog to page 2O ne actuator for all applications: suitable for both sliding doors and minimal door radii F or simple safety switch configuration during the teach-in operation Equip your machine or production line with a FlexFunction device to benefit from the versatility of a single safety switch. N ew LED concept with RGB LED: clear fault detection, visible from three sides M aximum safety according to EN ISO 13849-1 cat. 4 / PL e and EN ISO 14119 T wo versions available: guard locking according to open-circuit or closed-circuit current principle C an be connected in series with other EUCHNER devices...
Open the catalog to page 3FLEXFUNCTION A NEW APPROACH TO SAFETY SWITCHES The innovative safety switch CTS is EUCHNER’s first FlexFunction device. In addition to featuring the proven benefits of conventional transponder-coded EUCHNER safety switches with guard locking, the CTS combines in a single switch all the options otherwise available only in different variants. With or without guard lock monitoring, actuator code evaluation with high or low coding level – the choice is up to you with CTS. All options remain open until setup, because only then will the CTS be configured by the actuator. This is no obstacle to...
Open the catalog to page 4SIMPLE INTEGRATION INTO APPLICATIONS AND SYSTEMS Whether separate operation, series connection or linking to the higher-level control system using various communication standards – anything is possible thanks to the great flexibility offered by the CTS. Devices in the BP and BR system families combined with an EUCHNER IO-Link Gateway can communicate and send process and device data in real time to an IO-Link master. Comprehensive diagnostic messages enable rapid and targeted troubleshooting. Would you like to determine the current configuration of your device or conveniently perform a...
Open the catalog to page 5Monitoring the GUARD LOCKING HIGH coding level FLEXIBLE USE AND RECONFIGURABLE AT ANY TIME BY FACTORY RESET SAFETY DOOR PROTECTION P rotection of personnel with high level of protection against tampering required Additional flexibility thanks to retrofittable escape release Readily visible RGB LED for simplified diagnostics Monitoring of the DOOR POSITION HIGH coding level E SCAPE RELEASE (CAN BE RETROFITTED) PROCESS PROTECTION WITH OPTIONAL GUARD LOCKING FUNCTION Safety outputs react to door position High coding level protects against tampering Flexible installation by side mounting and...
Open the catalog to page 6No unintentional process interruption Covered installation: low coding level suffices PROTECTION OF PERSONNEL WITH OPTIONAL GUARD LOCKING FUNCTION Safety outputs react to door position Covered installation: low coding level suffices GUARD LOCKING FOR PROTECTION OF PERSONNEL Protection against over-traveling machine movement High coding level protects against tampering High locking force of Fmax 3,900 N Monitoring the GUARD LOCKING LOW coding level GUARD LOCKING FOR PROCESS PROTECTION Monitoring of the DOOR POSITION LOW coding level Monitoring the GUARD LOCKING HIGH coding level
Open the catalog to page 7OUR PRODUCTS FOR YOUR SAFETY SAFE DOOR DETECTION Transponder-coded safety switches without guard locking CES-C04 / CES-C07 Magnetically coded safety switches without guard locking CMS Electromechanical safety switches without guard locking NM / NP / GP / NZ SAFE GUARD LOCKING Transponder-coded safety switches with guard locking CTS / CTM / CTP / CTA / CET Electromechanical safety switches with guard locking TP / STP / STA / STM Safety switches with integrated mounting magnet CEM-C40 / CEM-C60 DOOR LOCKING SYSTEMS MGB / MGBS / MGB2 CLASSIC MGB2 MODULAR (MGB2 PROFINET / MGB2 EtherCAT) ACCESS...
Open the catalog to page 8All EUCHNER GmbH + Co. KG catalogs and technical brochures
-
EUCHNER Safety Services
24 Pages
-
Product Guide
20 Pages
-
Electronic-Key-System EKS
60 Pages
-
Electronic-Key-System EKS
60 Pages
-
Industry 4.0
16 Pages
-
EKS with touch panel
12 Pages
-
News 2023
6 Pages
-
Safe key system CKS2
10 Pages
-
Enabling Switches ZS
92 Pages
-
About EUCHNER
34 Pages
-
Transponder-coded safety switches
160 Pages
-
MGBS
52 Pages
-
MGB2
80 Pages
-
Multifunctional Gate Box MGB
5 Pages
-
Multifunctional Gate Box
133 Pages
-
Product Overview Automation
8 Pages
-
Product Overview ManMachine
6 Pages
-
AC-DP-04-SA
2 Pages
-
Safety Switches with Plastic Housing
172 Pages
-
Safety switch CTP‑BI
2 Pages
-
Safety Switches with Metal Housing
220 Pages
-
EKS with USB port
2 Pages
-
Proven Systems - Proven Safe
6 Pages
-
Multiple Limit Switches
36 Pages
-
Position Switches
56 Pages
-
Safety switch CTP-Extended
2 Pages
-
Safety Switches NQ/TQ
6 Pages
-
Joystick Switches
28 Pages
-
EKS Light
8 Pages
-
Safety Relays ESM
32 Pages
-
Electronic-Key-System
24 Pages