Hand-Held Pendant Stations/Handwheels
88Pages

{{requestButtons}}

Catalog excerpts

Hand-Held Pendant Stations/Handwheels - 1

Hand-held Pendant Stations/ Handwheels EUCHNER More than safety.

Open the catalog to page 1
Hand-Held Pendant Stations/Handwheels - 2

Internationally successful – the EUCHNER company EUCHNER GmbH + Co. KG is a world-leading company in the area of industrial safety technology. EUCHNER has been developing and producing high-quality switching systems for mechanical and systems engineering for more than 60 years. The medium-sized family-operated company based in Leinfelden, Germany, employs Headquarters in Leinfelden-Echterdingen around 700 people around the world. 16 subsidiaries and other sales partners in Germany and abroad work for our international success on the market. Quality and innovation – the EUCHNER products A...

Open the catalog to page 2
Hand-Held Pendant Stations/Handwheels - 3

About this catalog 4 How can I find the right product? 4 Hand-held pendant stations 6 Function and technology used in hand-held pendant stations 6 Hand-held pendant stations HBA 10 Hand-held pendant stations HBM 20 Hand-held pendant stations HBL 24 Hand-held pendant station kit 29 Hand-held pendant station HBA kit 29 Hand-held pendant station HBM kit 37 Hand-held pendant station HBL kit 41 Accessories for hand-held pendant stations HBA 45 Accessories for hand-held pendant station kit 47 Accessories for hand-held pendant station kit, all designs 48...

Open the catalog to page 3
Hand-Held Pendant Stations/Handwheels - 4

General About this catalog Due to their precision, their ergonomic design and their robustness, these products are the right choice for numerous applications. You will find the technical data after the product overview. The Hand-held Pendant Stations/Handwheels catalog provides you with an overview of our HBA, HBM and HBL series hand-held pendant stations as well as our HK and HW series handwheels. You will find the following series and accessories in this catalog: Hand-held pendant stations/handwheels Hand-held pendant stations Kit Magnetic detent mechanism Handwheels Mechanical detent...

Open the catalog to page 4
Hand-Held Pendant Stations/Handwheels - 5

General EUCHNER Standards and approvals Standards Hand-held pendant stations must comply with the requirements of the EMC directive 2004/108/EC. The EMC directive has been implemented in national law in the EU member states and, as a result, is binding for all manufacturers. Detailed requirements on EMC are defined in EN 61000 (electromagnetic compatibility EMC) part 6-2 and 6-4. If the requirements of this standard are met, conformity with the applicable laws and therefore with the EMC directive is assumed. EUCHNER hand-held pendant stations comply with the relevant standards and therefore...

Open the catalog to page 5
Hand-Held Pendant Stations/Handwheels - 6

Hand-held Pendant Stations Function and technology used in hand-held pendant stations The most important machine functions can be monitored, e.g. axis selection and axis movement, can be controlled decentrally using hand-held pendant stations. The freedom of movement of the machine operator is increased, and the operator can monitor and control processes without being tied to a fixed control panel. In addition to the control function, hand-held pendant stations can also have a safety function. For this purpose, the hand-held pendant stations are equipped with emergency stop buttons and...

Open the catalog to page 6
Hand-Held Pendant Stations/Handwheels - 7

Hand-held Pendant Stations EUCHNER Hand-held Pendant Stations EUCHNER As can be clearly seen in the figure, the enabling function can only be achieved at stage 2. This function is provided by the closing of the normally open contacts (NO = E1 and E2). If the button is released, that is back from stage 2 to stage 1, the normally open contacts are opened again. The 2-stage pushbuttons and 3-stage enabling switches are identical in this function. If, in this example, the button on a 3-stage enabling switch is pressed past the actuating point (stage 2) in panic (to stage 3), then not only...

Open the catalog to page 7
Hand-Held Pendant Stations/Handwheels - 8

Hand-held Pendant Stations Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.

Open the catalog to page 8
Hand-Held Pendant Stations/Handwheels - 9

Hand-held Pendant Stations EUCHNER Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illus

Open the catalog to page 9
Hand-Held Pendant Stations/Handwheels - 10

Hand-held Pendant Stations EUCHNER ► Handwheel 100 pulses, wear-free magnetic detent mechanism ► 2 pushbuttons, 2-stage, 1 NO contact each, e.g. for enabling function Depending on version: ► Tamper-proof emergency stop device according to EN ISO 13850, dual-channel ► 2 selector switches, 5 positions each (X, Y, Z, 4, 5 and 0, 1, 10, 100, 1000) ► 3 foil pushbuttons, 1 NO contact each Dimension drawing Notes ► Holder HBA for hand-held pendant stations: see accessories page 58 ► Associated flange connector, 23-pin: see accessories page 51 Technical data Operating temperature_ Storage...

Open the catalog to page 10
Hand-Held Pendant Stations/Handwheels - 11

Hand-held Pendant Stations EUCHNER 2 selector switches 5 positions each 3 foil pushbuttons, 1 NO contact each Emergency stop device Circuit plan Travel diagram see page 6 S8: Increment selection Selector switch right 5 positions S7: Axle selection Selector switch left 5 positions S4: Push button left S5: Push button middle S6: Push button right S2 (left) + S3 (right): Pushbutton 2-stage e.g. for enabling function Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog.

Open the catalog to page 11
Hand-Held Pendant Stations/Handwheels - 12

Hand-held Pendant Stations EUCHNER Dimension drawing ► Handwheel 100 pulses, wear-free magnetic detent mechanism ► 1 enabling switch, 3-stage, 2 NO contacts each Depending on version: ► Tamper-proof emergency stop device according to EN ISO 13850, dual-channel ► 1 selector switch with 6 positions (X, Y, Z, 4, 5, 6) ► 1 selector switch with 5 positions (0, 1, 10, 100, 1000) ► 3 foil pushbuttons, 1 NO contact each Notes ► Holder HBA for hand-held pendant stations: see accessories page 58 ► Associated flange connector, 23-pin: see accessories page 51 ► Associated flange connector, 28-pin: see...

Open the catalog to page 12
Hand-Held Pendant Stations/Handwheels - 13

Hand-held Pendant Stations Ordering table Features Version/item 3 foil pushbuttons, 1 NO contact each 2 selector switches, 5 and 6 positions Emergency stop device Circuit plan Axle selction Selector switch left 6 positions Increment selection Selector switch right 5 positions S8 Pushbutton middle Pushbutton left Enabling switch * ZXE 3-stage left Emergency Stop Pushbutton right Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Devices supplied may vary slightly from the illustration in the catalog. Ground connection Shield Handwheel...

Open the catalog to page 13

All EUCHNER GmbH + Co. KG catalogs and technical brochures

  1. Product Guide

    20 Pages

  2. Industry 4.0

    16 Pages

  3. News 2023

    6 Pages

  4. About EUCHNER

    34 Pages

  5. MGBS

    52 Pages

  6. MGB2

    80 Pages

  7. AC-DP-04-SA

    2 Pages

  8. EKS Light

    8 Pages

Archived catalogs