*mydirectindustry

50HR-LP

Product catalog summary

Overview: The manual provides instructions for hand-operated arbour presses, highlighting their robustness, precision, flexibility, and ergonomic design. These presses deliver linear and constant power throughout the stroke, making them suitable for assembly operations, ring or bearing assembly, small bending, and crimping operations.

Technical Specifications: The manual lists various technical data points such as power (kg), working stroke (mm), adjustable free height (mm), gooseneck depth (mm), rotation angle per mm of stroke, ram bore (mm), table dimensions, table recess, rotating table diameter, and weight (kg).

Unpacking and Installation: Upon unpacking, ensure all components are in good condition. The press should be securely attached to a workbench using the four mounting holes (Ø 12.5) to prevent tipping. Clean the rust protection from machined parts with a mild degreaser.

Adjustments Before Use:

Tooling Setup: Attach the upper part of the tool through the Ø16H7 bore of the slider and secure it with the HC M8 screw.
Capstan/Steering Wheel Hardness: Adjust the hardness to hold the rack and pinion in position based on tool weight using the star button.

Maintenance/Servicing: The press is robust and requires minimal maintenance. Lubricate moving parts twice a year with fine oil and keep the press clean for long-lasting operation.

Additional Information: The manual includes an exploded view and bill of materials for the PRESS 50HR-LP model. It also mentions other presses in the range, with power capacities from 200 kg to 80 T, and provides contact information for EMG Presses.

Catalog excerpts

HIGH-CAPACITY MANUAL Hand operated arbour presses are robust, precise, flexible and ergonomic. The power is linear and constant over the entire stroke according to the force exerted on the lever. They are frequently used for assembly operations, assembly of rings or bearings, small bending operations, various crimping operations, etc. Working stroke(mm) Adjustable free height(mm) Gooseneck depth(mm) Rotation angle per mm of stroke Ram bore(mm) 0 rotating table Weight(kg)

Open the catalog to page 1

USER MANUAL PRESS 50HR-LP >UNPACKING/INSTALLATION: Remove the press from its packaging. Ensure that the various components are in good condition before attaching the press to the workbench, through the 4 mounting holes (Ø 12.5) in the base of the press provided for this purpose. Clean the rust protection covering the machined parts with a mild degreaser. Warning: The press must be attached securely to its support to prevent any tipping of the press during use > ADJUSTMENTS BEFORE USE: • Setting up your tooling: Attach the upper part of your tool through the Ø16H7 bore of the slider and lock it...

Open the catalog to page 2

OTHER PRESSES IN THE RANGE Working stroke Working stroke Adjustable clearance Adjustable clearance Adjustable table Power Working stroke Working stroke Adjustable clearance Adjustable clearance PRESS MANUFACTURER FROM 200 KG TO 80 T www.emgpresses.com - T. + 33 (0)4 50 01 11 58 - Email : [email protected] EMG PRESSES - LONG SAS - 80 rue du Loquois - ZAE Rumilly Sud - 74150 Marigny-St-Marcel - France

Open the catalog to page 4

All ETS LONG SAS - EMG PRESSES catalogs and technical brochures

4HP
4 Pages
4HR-LP
4 Pages
2HR
4 Pages