Static force exerted on the lever in kg Maximum power allowed by the press EMG HAND OPERATED ARBOUR PRESS Hand operated arbour presses are robust, precise, flexible and ergonomic. The power is linear and constant over the entire stroke according to the force exerted on the lever. They are frequently used for assembly operations, assembly of rings or bearings, small bending operations, various crimping operations, etc. Power restituted by the press in the axis of the ram in kg Adjustable free height(mm) 4g ► 280 Rotation angle per mm of stroke 3037

Remove the press from its packaging. Check that the various parts are in good condition before attaching the press to the workbench through the holes in item. 1 provided for this purpose. Clean the rust protection covering the machined parts with a mild degreaser. • Height clearance: Loosen the two CHC M10 socket head cap screws item 2. Caution: Secure or hold the head so that it does not fall when unscrewing: risk of pinching hands or damaging the tool. Move the clamp away from the head of the press by progressively tightening the HC M10 screw ref.3 (Maximum % turn). Adjust the head to its final...

OTHER PRESSES IN THE RANGE Power Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height PRESS MANUFACTURER FROM 200 KG TO 80 T www.emgpresses.com...