HAND OPERATED ARBOUR PRESS Hand operated arbour presses are robust, precise, flexible and ergonomic. The power is linear and constant over the entire stroke according to the force exerted on the lever. They are frequently used for assembly operations, assembly of rings or bearings, small bending operations, various crimping operations, etc. Power output according to the force applied to the lever arm 2HR Static force exerted on the lever in kg Power restituted by the press in the axis of the ram in kg 152025 Maximum power allowed by the press Technical data: 110150185200 Power(kg) Working stroke(mm) Adjustable free height(mm) Gooseneck depth(mm) Rotation angle per mm of stroke Ram bore(mm) Table bore

Remove the press from its packaging. Check that the various parts are in good condition before attaching the press to the workbench through the holes in item. 1 provided for this purpose. Clean the rust protection covering the machined parts with a mild degreaser. • Height clearance: Caution: Secure or hold the head so that it does not fall when unscrewing: risk of pinching hands or damaging the tool. Loosen the two CHC M10 screws item 3 while holding the press head item 4 with one hand. Position the press head at the desired height and lock the 2 screws item 3. • Installing your tooling: Use...

OTHER PRESSES IN THE RANGE Power Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height Working stroke Working stroke Working stroke Adjustable clearance height Adjustable clearance height Adjustable clearance height PRESS MANUFACTURER FROM 200 KG TO 80 T www.emgpresses.com...