RF POWER AMPLIFIERS MODEL 8000-021

Product catalog summary

Introduction
ETS-Lindgren's Model 8000-021 RF Power Amplifier is designed for EMC applications, specifically meeting MIL-STD 461 CS114, Curve 5 requirements. It utilizes GaAs technology for enhanced linearity, ruggedness, and efficiency compared to silicon-based amplifiers.

Specifications

Electrical: Frequency range from 10 kHz to 250 MHz, nominal output power of 800W, gain variation of ± 2 dB, harmonics at -20 dBc maximum, output impedance of 50 Ω, input VSWR of 2:1 maximum, AC supply of 220 to 240 VAC, single phase, supply frequency range of 50/60 Hz, and line power less than 3 kVA.
Mechanical: Remote interface via GPIB, RF connectors are Type N.
Physical: Dimensions are 19 inches, 6U case, 550 mm (21.7 inches) deep, weight is 33.0 kg (72.8 lb), standard case style is rack mount with rear panel connectors, optional case style is bench mount with front panel connectors.

Key Features

High reliability GaAs design.
Excellent performance and efficiency.
Safety interlock feature.
Very low distortion and tolerance for 100% mismatch.

Catalog excerpts

MODEL 8000-021 MIL-STD 461 CS114, Curve 5 ■ High Reliability GaAs Design ■ Excellent Performance and Efficiency Safety Interlock ETS-Lindgren’s Model 8000-021 RF Power Amplifier is a 800W power amplifier, designed primarily for EMC applications that include MIL-STD 461 CS114, Curve 5 requirements. Utilizing GaAs technology, this RF amplifier provides higher linearity, rugged design and better efficiency performance versus silicon-based amplifiers. The 8000-021 provides very low distortion and tolerance for 100% mismatch. Technical Specifications An ESCO Technologies Company Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 2/15 - RR/PDF © 2015 ETS-Lindgren Rev. A

Open the catalog to page 1

All ETS Lindgren catalogs and technical brochures

Archived catalogs

CTIA Authorized Test Lab
2 Pages