RF POWER AMPLIFIERS MODEL 8000-020

Product catalog summary

Overview: The document provides technical specifications and features of the ETS-Lindgren Model 8000-020 RF Power Amplifier, designed for EMC applications. It highlights the use of GaAs technology for improved performance and efficiency compared to silicon-based amplifiers.

Specifications:

Electrical: The amplifier operates within a frequency range of 100 kHz to 230 MHz, with a nominal output power of 80W. It features a gain variation of ± 2 dB, harmonics at a maximum of -20 dBc, and an output impedance of 50 Ω. The input VSWR is 2:1 maximum, and it requires an AC supply of 100 to 250 VAC, single phase, with a supply frequency range of 50/60 Hz and line power consumption of less than 400 VA.
Mechanical: The device includes a GPIB remote interface and Type N Female RF connectors. It is housed in a 19-inch, 3U case, 440 mm (17.3 in) deep, weighing 13.0 kg (28.7 lb). The standard case style is rack mount with rear panel connectors, with an optional bench mount style featuring front panel connectors.

Compliance and Features: The amplifier complies with IEC/EN 61000-4-6 standards at 10V and offers high reliability with a safety interlock feature. It is designed to handle rigorous antenna and test chamber requirements, providing low distortion and tolerance for 100% mismatch.

Catalog excerpts

ETS-Lindgren's Model 8000-020 RF Power Amplifier designed primarily for EMC applications including rigorous antenna and test chamber requirements. Utilizing GaAs technology, this RF amplifier provides higher linearity, rugged design and better efficiency performance versus silicon-based amplifiers. MODEL 8000-020 IEC/EN 61000-4-6, 10V ■ High Reliability GaAs Design ■ Excellent Performance and Efficiency Safety Interlock The 8000-020 provides very low distortion and tolerance for 100% mismatch. Technical Specifications Electrical Frequency Range Nominal Output Power Gain Variation Harmonics Output Impedance Input VSWR AC Supply Supply Frequency Range 50/60 Hz Line Power < 400 VA IEC/EN 61000-4-6 10V Mechanical Remote Interface RF Connectors GPIB Type N Female Dimensions 19 in, 3U Case, 440 mm (17.3 in) Deep Case Style (Standard) Rack Mount with Rear Panel Connectors Case Style (Optional) Bench Mount, Front Panel Connectors METS-LINDGREN An ESCO Technologies Company ets-lindgren.com Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 4/16 PDF/RR © 2016 ETS-Lindgren v2.0

Open the catalog to page 1

All ETS Lindgren catalogs and technical brochures

Archived catalogs

CTIA Authorized Test Lab
2 Pages