3106B Double-Ridged Guide Antenna
4Pages

Double-Ridged Waveguide Horn Model 3106B 3-D Patterns at Available at www.ets-lindgren.com/3106B .ets-lindgren.c www.ets-lindgren.com/3106B Increased Frequency Range: 200 MHz - 2.5 GHz Maintains Single Lobe Radiation Pattern Over Frequency 1.6 kW Power Input Capacity The Model 3106B Double-Ridged Waveguide Horn is a new, updated version of an industry standard. New improvements to this classic allow it to outperform other antennas in its class. The frequency range has been increased from 2 GHz to 2.5 GHz. Better beam forming has resulted in a single main lobe across frequency. A 6 dB gain improvement has been achieved at 2 GHz. The Model 3106B was designed to generate high electromagnetic fields with relatively low power input, and low-level signals where high gain characteristics are needed. The new improvements that were made to this antenna further enhance those capabilities. Features Increased Frequency The Model 3106B’s frequency range has USA: ETS-Lindgren’s Model 3106B Double-Ridged Waveguide Horn been increased from 2 GHz to 2.5 GHz. Measurements can be made over a greater frequency range without stopping for band breaks. The extended frequency range provides a comfortable overlap with other antennas in this series. Improved Lobe Pattern The 3106B now produces a welldefined single lobe radiation over its operational frequency range. As a result, electromagnetic energy is evenly distributed on target surfaces, while improving information for gain and vector measurements. Improved Gain Enhancements to the Model 3106B have resulted in an increase of 6 dB gain at 2 GHz. This characteristic translated into more efficient amplifier use and generation of higher field strengths with less power input than similar antennas. At 2 GHz the 3106B’s gain is 9 dB as opposed to FRANCE: 3 dB with the original 3106 design. This requires only a calculated 168 watts to generate 200 V/m at 1 m, vs. 668 watts for the original 3106. Antenna Assembly Mounting bracket drilled to accept ETS-Lindgren or other tripod mounts with 1/4 in x 20 threads Individually calibrated at 1 m per SAE ARP 958 at our A2LA accredited lab. 3 m calibration per ANSI C63.5 available at additional cost. Actual antenna factors and a signed Certificate of Calibration Conformance included with manual Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44.(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel +81.3.3813.7100 info@ets-lindgren.com Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44.(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications.

Double-Ridged -Ridged Waveguide Horn Model 3106B Electrical Specifications MODEL FREQUENCY RANGE MAXIMUM CONTINUOUS POWER PEAK POWER IMPEDANCE (NOMINAL) Physical Specifications MODEL Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44.(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel +81.3.3813.7100 info@ets-lindgren.com Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44.(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for...

An ESCO Technologies Company Waveguide Horn USA: FINLAND: UK: FRANCE: CHINA: JAPAN: ONLINE: nformation presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 3/07 - 3k W/RE © 2007 ETS-Lindgren REV A

An ESCO Technologies Company Waveguide Horn nformation presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 3/07 - 3k W/RE © 2007 ETS-Lindgren REV A