video corpo

quick, easy and precise
45Pages

{{requestButtons}}

Catalog excerpts

quick, easy and precise - 1

Product Catalogue

Open the catalog to page 1
quick, easy and precise - 2

ETP Transmission AB has developed and manufactured hydraulic sleeves for more than 35 years under the brand name ETP HYDRO-GRIP for the woodworking industry. We are a global company and our customers are the leaders within their respective segments. This is the way we like it, working with people that demand the absolute best from us means we are constantly developing and improving ourselves and our products. It is your challenges that drive us forward. This catalogue covers our standard products for the woodworking industry and in addition to this we also manufacture customized designed...

Open the catalog to page 2
quick, easy and precise - 4

Pressurizing Set the pressure with the alien T-wrench Place the tool and HYDRO-GRIP on the machine spindle. Turn the alien T-wrench a couple of turns and the tool is automatically centered and fastened. The whole process takes literally just a few seconds. Set the pressure with the high pressure pump Connect the pump to the HYDRO-GRIP, pressurize and check that the correct pressure of 400-450 bar has been reached. We strongly recommend the grease Blasolube 301, please see part Technical Specification. Permanent assembly Permanent assembly means that the sleeve only expands against the...

Open the catalog to page 4
quick, easy and precise - 5

Sleeves for general woodworking pressurizing with allen T-wrench Photo courtesy of Drömtrappor®, Emma 4.G.1 from Trätrappor AB

Open the catalog to page 5
quick, easy and precise - 6

SLEEVES FOR GENERAL WOODWORKING • Fit your tools quick and easy • Perfect centering and fastening with only an allen T-wrench • Easy to operate • Probably the most durable pressurizing mechanism on the market ETP HYDRO-GRIP® CI Sleeve for interchangeable tool assembly that can be used with different tools. The tool should be bolted to the sleeve’s collar. Several tools can be mounted simultaneously. Pressurizing is carried out with an allen T-wrench. The CI 050 has two, threaded M8-holes for carrier pegs on a 70mm pitch diameter. The sleeve has two, threaded M8-holes for carrier pegs on a...

Open the catalog to page 6
quick, easy and precise - 7

SLEEVES FOR GENERAL WOODWORKING Benefits and features • Fit your tools quick and easy • Stainless steel • Can be ultrasonically cleaned • Practical handling with flat balance surface ETP HYDRO-GRIP is manufactured in stainless steel and perfect for use in demanding environments. Sleeve for interchangeable tool assembly that can be used with different tools. The tool should be bolted to the sleeve’s collar. Several tools can be mounted simultaneously. Pressurizing is carried out with an allen T-wrench. The CIR 050 has two, threaded M5-holes for carrier pegs, on a 70 mm pitch diameter. See...

Open the catalog to page 7
quick, easy and precise - 8

Save time - Save money No more trial and error! By using the ETP CUBIT mini you literary make money by stop wasting your valuable time with tool changes and replacement of cumbersum shims. The adjustment of a tool set can be made in seconds thanks to the patented adjustable CUBIT system. The CUBIT mini can be attached to a number of different ETP HYDRO-GRIP products each suitable for a vast number of woodworking applications.

Open the catalog to page 8
quick, easy and precise - 9

Quick and easy to use The adjustment is quickly and easily done in a few moments by turning the top cover. There is an indicating scale and a click function assisting you to notify the movement on the tool set. Each click is equal to a 0.025 mm movement and the total adjustment is 8 mm. The adjusting device is completely covered in the CUBIT mini and there are no other small parts. Illustrated on this page is a combination with a HYDRO-GRIP type CI and EI2. Use your creativity and you will soon find several applications where to gain a lot by using a reliable and precise adjustable system....

Open the catalog to page 9
quick, easy and precise - 10

SLEEVES FOR GENERAL WOODWORKING rMumpTl Multiple tools applications Benefits and features • Fit your tools quick and easy several tools can be mounted on the same sleeve • Perfect centering and fastening with only an allen T-wrench • Same durable pressurizing mechanism as CI Sleeve for interchangeable tool assembly, the same basic construction as the CI but also has a thread and locking nut. This means the sleeve can be easily switched between different tools. Several tools can be mounted to the same sleeve. Pressurizing is carried out with an allen T-wrench. Technical specification ETP...

Open the catalog to page 10
quick, easy and precise - 11

SLEEVES FOR GENERAL WOODWORKING Benefits and features • Made in short lengths • Light press fit • Pressurizing is carried out with an allen T-wrench ETP HYDRO-GRIP® AI Sleeve for permanent tool assembly. Made in short lengths to allow for a light press fit. Heat up the tool before mounting. The tool and HYDRO-GRIP should be bolted together. Pressurizing is carried out with an allen T-wrench. Technical specification ETP HYDRO-GRIP® AI The AI 050 has two, threaded M8 holes for carrier pegs, on a 70 mm pitch diameter. The AI-1 1/4740 has two tool fastening holes. See page 44 for more...

Open the catalog to page 11
quick, easy and precise - 12

Sleeves for general woodworking pressurizing with high pressure pump

Open the catalog to page 12
quick, easy and precise - 13

SLEEVES FOR GENERAL WOODWORKING Benefits and features • Several tools can be mounted on the same sleeve • Reduces set up time • Pressurizing is carried out with a high pressure pump • Allows design with longer sleeves Sleeve for interchangeable tool assembly which can easily be switched between different tools. The tool is fastened to the sleeve by bolts through the collar. Several tools can be mounted simultaneously on the same sleeve. Pressurizing is carried out with a high pressure grease pump. This allows the use of longer sleeves. Technical specification ETP HYDRO-GRIP® C The sleeve...

Open the catalog to page 13
quick, easy and precise - 14

SLEEVES FOR GENERAL WOODWORKING ETP HYDRO-GRIP® B Sleeve for interchangeable tool assembly, the same basic construction as the BI with a thread and locking nut. This means the sleeve can be easily switched between different tools. Several tools can be mounted to the same sleeve. Pressurizing is carried out with a high pressure grease pump. This allows the use of longer sleeves. • Well establish design with thread and locking nut • Several tools can be mounted on the same sleeve • Perfect centering and fastening • Pressurizing is carried out with a high pressure pump

Open the catalog to page 14

All ETP catalogs and technical brochures

  1. ETP-TECHNO

    4 Pages

  2. ETP- EXPRESS

    5 Pages

  3. Woodworking

    16 Pages

  4. ETP-OCTOPLUS

    4 Pages

  5. ETP-HYLOC

    4 Pages

  6. ETP-MINI

    2 Pages

  7. ETP-CLASSIC

    4 Pages

  8. ETP-EXPRESS

    4 Pages

  9. PUMP-M08

    1 Pages

  10. ETP-CUBIT

    11 Pages

  11. ETP-UNIGRIP

    2 Pages

  12. ETP-HYCON

    4 Pages

  13. ETP-OCTOPUS

    4 Pages

  14. HYDRO-GRIP-A

    1 Pages

  15. HYDRO-GRIP-B

    2 Pages

  16. HYDRO-GRIP-C

    1 Pages

  17. ETP-TECHNO

    4 Pages

Archived catalogs

  1. ETP ECOGRIP

    2 Pages