Catalogs >
ETP >
HYDRO-GRIP-CL-BL-AL

HYDRO-GRIP-CL-BL-AL
3Pages

Catalog excerpts

SLEEVES FOR TOOLS WITH LARGE INTERNAL DIAMETERS CL is a sleeve for interchangeable tool assembly. This means the sleeve can be easily switched between different tools. Pressurizing is carried out with a high pressure grease pump, axially in the sleeve's flange. Technical Specificatior *) The CL 045 sleeve has two carrier pegs, 8,5 x 5 mm on a 70 mm pitch diameter **) The CL 050 has two, threaded M5-holes for carrier pegs, on a 70 mm pitch diameter. See page 44 for more information.

Open the catalog to page 1

SLEEVES FOR TOOLS WITH LARGE INTERNAL DIAMETERS BL is a sleeve for interchangeable tool assembly which has a thread and locking nut. This means the sleeve can be easily switched between different tools. Pressurizing is carried out with a high pressure grease pump, axially in the sleeve's flange. Technical Specification *) The BL-45 sleeve has two carrier pegs, 8,5 x 5 mm, on a 70 mm pitch diameter. ") The BL 050 has two, threaded M5-holes for carrier pegs, on a 70 mm pitch diameter. See page 44 for more information.

Open the catalog to page 2

SLEEVES FOR TOOLS WITH LARGE INTERNAL DIAMETERS AL is for permanent assembly. Made to allow for a light press fit. The tool and HYDRO-GRIP should be bolted together. Pressurizing is carried out with a high pressure grease pump, axially in the sleeve's flange. *) The AL-45 sleeve has two carrier pegs, 8,5 x 5 mm, on a 70 mm pitch diameter. **) The AL-50 has two, threaded M5-holes for carrier pegs, on a 70 mm pitch diameter. See page 44 for more information.

Open the catalog to page 3