ETP-HYLOC - 4 Pages

Add to MyDirectIndustry favorites
ETP-HYLOC

Catalog excerpts

For heavy loads and quick mounting ETP-HYLOC is a hydromechanical hub-shaft connection which, due to its robust design, is ideally suited to work in difficult environments and heavy operations like steel rolling mills, process industries etc. An interesting application, among many, has been fastening of feeding or forming rolls to shafts. ETP-HYLOC is fast to mount, has good concentricity and can take high torque and radial loads. Mounting and dismantling is easily carried out with a hydraulic pump.

 Open the catalog to page 1

Good runout, easy to position In this straightening line for steel, the forming rollers are fastened with ETP-HYLOC. The position of the rollers relatively to each other along the shafts are exactly adjusted, it will not change during pressurising. The radial runout is minimised and the change of rollers facilitated. High radial forces can be transmitted with ETP-HYLOC, as the connection is solid all through. Good runout, simple to adjust ETP-HYLOC, due to its robust design, is suited for difficult environments and heavy operations. Here the feed rollers are fastened in a steel mill....

 Open the catalog to page 2

Heavy loads and quick mounting ETP-HYLOC is available as standard for shafts 50 - 220 mm. Runout ≤ 0,02 mm. Number of mountings: Max. 2 000. Customized models for shaft > 220 mm can also be offered on request. For extreme high torque applications the contact surfaces of ETP-HYLOC (sizes ≥100 mm) can be plated with ETP-HFC, High Friction Coating, which doubles the torque capacity. Construction ETP-HYLOC is a hydro-mechanical joint, which consists of a double-walled steel sleeve which encloses a conical moveable piston. Mounting and dismantling is carried out with a hydraulic pump. In the...

 Open the catalog to page 3

Technical specification ETP-HYLOC* Transmittable torque or axial force at 1000 bar Yield point Polar moment Transmittable torque at different mounting pressures. The torque for sizes a100 can be increased by using ETP- T = transmittable torque when axial force is 0. FA = transmittable axial force when torque is 0. DH= Outer diameter for hub material in steel. HThreads for easy handling. Dimension subject to alterations without notice. MOUNTING - ADVICE The contact surfaces L and L1 must be completely covered by the shaft and hub. The oil for the pump should be a transmission oil type 80 W....

 Open the catalog to page 4

All ETP catalogs and technical brochures

  1. Woodworking

    16 Pages

  2. ETP Metalworking

    52 Pages

  3. ETP ECOGRIP ER

    4 Pages

  4. ETP-OCTOPLUS

    4 Pages

  5. ETP-HYLOC

    4 Pages

  6. ETP-MINI

    2 Pages

  7. ETP-CLASSIC

    4 Pages

  8. ETP-EXPRESS

    4 Pages

  9. HYDRO-GRIP-G2

    1 Pages

  10. Woodworking

    45 Pages

  11. HYDRO-GRIP-GE2

    1 Pages

  12. SPACERS-NIPPLES

    1 Pages

  13. PUMP-M08

    1 Pages

  14. HYDRO-GRIP-CIA

    4 Pages

  15. Blasolube 301

    7 Pages

  16. ETP-CUBIT-MINI

    2 Pages

  17. ETP-CUBIT

    11 Pages

  18. HYDRO-GRIP-GEW2

    1 Pages

  19. HYDRO-GRIP-G3

    1 Pages

  20. HYDRO-GRIP-AEI

    3 Pages

  21. ETP-HYDROPRESS

    1 Pages

  22. ETP-UNIGRIP

    2 Pages

  23. ETP-HYCON

    4 Pages

  24. ETP-OCTOPUS

    4 Pages

  25. HYDRO-GRIP-EI

    4 Pages

  26. HYDRO-GRIP-D-DI

    2 Pages

  27. HYDRO-GRIP-AH

    1 Pages

  28. HYDRO-GRIP-A

    1 Pages

  29. HYDRO-GRIP-AI

    1 Pages

  30. HYDRO-GRIP-B

    2 Pages

  31. HYDRO-GRIP-C

    1 Pages

  32. HYDRO-GRIP-BI

    1 Pages

  33. ETP-MINI

    2 Pages

  34. ETP-TECHNO

    4 Pages

  35. ETP-CLASSIC

    4 Pages

  36. ETP-EXPRESS

    5 Pages

Archived catalogs

  1. ETP HYDRO-GRIP

    4 Pages

  2. ETP ECOGRIP

    2 Pages