Catalogs >
ETP >
ETP ECOGRIP ER folder 2019

ETP ECOGRIP ER folder 2019
4Pages

Catalog excerpts

HYDRO-GRIP BENEFITS & FEATURES Turn ER holders and driven Tools into hydraulic Easy handling and precision Excellent repeatability Adjustability of run-out Make your ER holders and driven tools hydraulic and enjoy multiple benefits With ETP ECoGRIP ER you can easily turn your standard ER collet holders and driven tools into high precision hydraulic holders. thus you can easily enjoy all the positive benefits of hydraulic clamping such as easy handling and precision, at an impressive competitive price level. this enables more users to benefit from decrease tool wear and increased productivity, when compared to using ER collet holders. with the use of the three axial screws an adjustability of the run-out is achieved.

Open the catalog to page 1

www.etp.se - info@etp.se Adjustable holder ETP ECOGRIP™ ER For outer threaded toolholders and driven tools Your ER holder internal thread nut etp-ecogrip Metric range technical Specification Dimensions, mm Adjustment screws Internal thread nut inch range technical Specification Dimensions, inch Adjustment screws Internal thread nut ER Part no. Item description size 16 686945 ETP ECOGRiP-1/4"/ER16 *) This size ECOGRIP ER has 2x M3x16 adjustment screws located 180 degrees apart. It also has an additional 2x M5x8 adjustment screws, located 180 degrees apart, at the back of the thread nut. **)...

Open the catalog to page 2

www.etp.se - info@etp.se ETP ECOGRIP™ ER For inner threaded driven toolsYour ER holderadaptor unit Adjustable holder External thread nut adjustment screws Metric range technical SpecificationDimensions, mm Adjustment screws External thread nut ER Part no. Item description D1 D2 D3 D4 L1 L2 L3 L4 L5 L7 D5 No. Dim. N D6 L6 Thread N1 Tt T* Dimensions, inch Adjustment screws External thread nut ER Part Item description D1 D2 D3 D4 L1 L2 L3 L4 L5 L7 D5 No. Dim. N D6 L6 Thread N1 Tt T* Tt: Recommended tightening torque in Nm for the External thread nut. q From stock*) T = Min. and Max...

Open the catalog to page 3

1. Mount the ring nut on the ER holder 2. Mount the ETP ECOGRIP ER in the holder and twist to seal 3. Mount the adjustment screws When mounted correctly, an initial runout of 0.020 mm is achieved. Then adjust the runout further by lightly tightening on the adjustment screws until your desired runout is achieved. Torque wrench Use the torque wrench to ensure correct and consistent tightening by different users. this wrench should be used with all HYDRo-GRIP and ECoGRIP holders. torque: 6 Nm. Watch ETP ECOGRIP ER on YouTube Item description tightening torque: Part no. 0 From stock O Qn...

Open the catalog to page 4