video corpo

ETP-CLASSIC
4Pages

{{requestButtons}}

Catalog excerpts

ETP-CLASSIC - 1

The original - competitive connection for normal needs ETP-CLASSIC is used in a large variety of applications, for mounting timing belt pulleys, cam curves and arms etc. Positioning along and around the shaft is easy and fast with high precision. Service and maintenance are also quick because of the easy dismantling. ETP-CLASSIC is recommended for all normal needs. ETP-CLASSIC is also available in stainless, type R, suitable for the food and medical industries. No backlash In this robot used for loading machine tools, sometimes the arms needs to be changed quickly. The new arms need to be positioned accurately and without backlash. For this ETP-CLASSIC was the best choice. Setting, adjustment Packaging machines have a lot of moving parts, such as gears, cams and levers, which during assembly has to be accurately positioned in relation to each other, both axially and radially. This is made easily with the use of ETP-CLASSIC. Easy positioning In this label printing machine used within the beverage industry an exact adjustment is needed, to get the labels on at the right time and position. A number of ETP-CLASSIC is used for the positioning of timing pulleys and other components. In all places where the connection is visible, stainless steel is needed, due to wash down requirements. ETP-CLASSIC R was found to be ideal for this.

Open the catalog to page 1
ETP-CLASSIC - 2

ETP-CLASSIC is available as standard for shafts 15-100 mm, also imperial and a short version, (type S). Also available in stainless steel ( type R). Runout: 0,03 - 0,06 mm. Number of mountings: 100 (type R: 50). The small number of clamping screws with low tightening torque, makes the mounting/ dismantling procedure fast and easy. Construction ETP-CLASSIC is a hydraulic connection which consists of a double-walled hardened steel sleeve, filled with a specially developed pressure medium, sealing ring, piston, pressure flange and cap head clamping screws. ETP-CLASSIC type R is made of...

Open the catalog to page 2
ETP-CLASSIC - 3

Technical specification ETP-CLASSIC® ETP-CLASSIC® Transmittable axial force radial force Tt= Recommended tightening torque for the screws. *) The dimensions are valid before mounting. Dimensions subject to alterations without notice. Tightening torque By increasing the tightening torque of the screw sizes according to the table, the transmittable torque can be increased by 25%. Note: Only to be used when operating temperature < mounting temperature. Max. tightening torque (screw quality 12.9) M5 M6 M8 T= Transmittable torque when axial force is °. } Wh the is tightened to Tt...

Open the catalog to page 3
ETP-CLASSIC - 4

Notation ETP-CLASSIC in inch-XX Technical specification ETP-CLASSIC® in inch Transmittable torque or axial force T Fa ETP-CLASSIC is also available in a large assortment of inch sizes. The main dimensions are given in the table, for more information please refer to technical data for ETP-CLASSIC. TOLERANCES ETP-CLASSIC Hub tolerance Technical specification ETP-CLASSIC® type S Transmittable Screws | torque or axial force | DIN 912, 12.9 mLm Nm kN | N°. Dim. Nta 31 53 5 3 M5 8 ETP-CLASSIC is also available in a shorter version, type S, which is especially suitable...

Open the catalog to page 4

All ETP catalogs and technical brochures

  1. ETP-TECHNO

    4 Pages

  2. ETP- EXPRESS

    5 Pages

  3. Woodworking

    16 Pages

  4. ETP-OCTOPLUS

    4 Pages

  5. ETP-HYLOC

    4 Pages

  6. ETP-MINI

    2 Pages

  7. ETP-EXPRESS

    4 Pages

  8. PUMP-M08

    1 Pages

  9. ETP-CUBIT

    11 Pages

  10. ETP-UNIGRIP

    2 Pages

  11. ETP-HYCON

    4 Pages

  12. ETP-OCTOPUS

    4 Pages

  13. HYDRO-GRIP-A

    1 Pages

  14. HYDRO-GRIP-B

    2 Pages

  15. HYDRO-GRIP-C

    1 Pages

  16. ETP-TECHNO

    4 Pages

Archived catalogs

  1. ETP ECOGRIP

    2 Pages