EVE - ETIREL Build-in switch SV Build-in devices EVESYS Control equipment ETIREL RF Control Wireless System Electromechanical Relays Technical data Modular and control devices POWER NEEDS CONTROL

Rated current Utilization category Build-in switch SV Application Build-in switch SV is used as a main switch in distribution boxes in houses or as a switch for individual electric circuits. With a build-in switch we can completely replace the cam switch. Build-in switch SV can be sealed either in ON or OFF position. Advantages Build-in switch SV has a more robust and simple construction and therefore a more reliable operation. It also shows the status of the contacts. With an additional label the circuit in which the switch is built in can be marked. Switches with In< 63A have a double switching...

Technical data on page 107

Change-over switch Center-off change-over switch Push-button with control light Technical data on page 107

This product can be used for Push button with control light and for Signal light Application For signalling in house, command panels, etc. Standards CEE 15, DIN 43880 Bell transformer Application For supplying of bells, buzzers, gongs and other devices. It is protected against continual short circuits, the primary and secondary winding are separated. Standards IEC 61558, EN 60742 Technical data on page 107

Control equipment ETIREL Application: Control signals in low-power circuits, combined with buttons, switches, for automation systems Advantages: ■ Voltage range AC230 or AC / DC 24V, ■ 1 module, DIN rail mounting ■ Changeover contact 1x16A or 3x16A, ■ Output status LED indication ■ „True OFF" relay - relay timing without supply voltage ■ Sample of use: back-up source for Delay OFF in case of voltage failure (emergency lighting, emergency respirator, or protection of el. controlled doors - in case of fire) ■ 2 time functions adjustable by rotary switch: • a - Delayed return after disconnecting...

Multifunction time relay CRM-91H, CRM-93H Advantages ■ 1-module, DIN rail mounted ■ Universal supply voltage: AC/DC 12V - 240V ■ 10 functions: - 5 time functions controlled via supply voltage - 4 time functions controlled via control input - 1 function of memory (latching) relay ■ Time scale 0.1 s - 10 days divided into 10 ranges ■ User-friendly setting of functions and time via rotary switch ■ Output contact: CRM-91H 1x16A changeover CRM-93H 3x8A changeover ■ Output indication: multifunction red LED, flashing at certain states Functions a) Delay ON after energisation b) Delay OFF after energisation c)...

£TtControl equipment ETIREL Multifunction time relay CRM-91H, CRM-93H Time relay CRM-2H Advantages ■ 1-module, DIN rail mounted ■ Universal supply voltage: AC/DC 12V - 240V ■ 2 time functions: - cycler beginning with pulse - cycler beginning with pause ■ Time scale 0.1s - 100 days divided into 10 time ranges ■ Rough time setting by rotary switch ■ Output contact: 1x 16 A changeover ■ Output indication: multifunction red LED Cycler beginning with pause Technical data on page 111, 113

eve - etirel Advantages ■ 1-module, DIN rail mounting ■ Supply voltage: AC/DC 12V - 240 V ■ Generates motor starting cycle star-delta ■ Time t1 (star) - time scale 0.1 s - 100 days is divided into 10 time ranges - rough time setting by rotary switch - fine time setting by potentiometer (from 0,1 to1) ■ Time t2 (delay) between star/delta: - time range 0.1 s - 1 s is set by potentiometer ■ Output contact: 2x 16 A (AC1) ■ Output indication: multifunction red LED Delay ON star/delta relay CRM-2T Staircase switch CRM-4 Advantages ■ 1-module, DIN rail mounted ■ Supply voltage: AC 230 V ■ Protection...

Control equipment ETIREL Programmable staircase switch CRM-42 Advantages ■ 1-module, DIN rail mounted. ■ Supply voltage: AC 230 V ■ Intelligent staircase switch, the same use as CRM-4, but with increased possibility of control. In mode ''PROG'' it is possible to select the time of delayed OFF by number of button-pressing sequences. Each pressing multiplies the time set by potentiometer, which that the time is set to 5 min and the button is pressed on 3 times, the output is automatically prolonged to 15 min. The output can also be switched off earlier (reset) by a long pressing of button (longer...

Control equipment ETIREL Analog electromechanical time switch APC-D1, APC-DR1 Advantages ■ The APC time switch controls any electrical installation by means of daily programs. ■ Without (D1) or with (DR1) battery backup. ■ Manual switch with permanent ON position. ■ Supply voltage : AC 230V ■ Sealable cover of frontal panel ■ Output contact :1x NO 16A ■ Simple dial time setting. Minimum switching time is 15 min. ■ 1 module, DIN rail mounting. Analog electromechanical time switch APC-D1, APC-DR1 Multifunction relay SMR-T, SMR-H, SMR-B Advantages ■ Multifunction relay designated for installation...

eve - etirel £TtControl equipment ETIREL Function Function a - delay off on entering edge output times when it is switched. Each following pressing (max. 5x) increases time Long pressing switches output off Function b - delay off on downward edge output times after button is switched off , switches immediately Function c - delay off on downward edge after switching off output switches on and times. Function f - delay on delay on after switch is switched on until it is switched off Function g - pulse relay switches on by a press, another pressing switches the output off . The length of pressing...

Technical data on page 124 85

Advantages ■ 1-module, DIN rail mounting ■ Supply voltage: AC 230 V ■ Designed for dimming of electrical bulbs and halogen lights with wound or electronic transformer ■ For switching and dimming of lights, control inputs for a button ■ Short pressing switches ON/OFF, longer pressing (more than 0.5 s) enables gradual light intensity setting when switched off, brightness level is stored in a memory and when switched on again last brightness level is restored ■ Output without contacts: 2x MOSFET ■ LED output indication (with any level of brightness) ■ Possibility of parallel connection of control...