ETICONNECT
28Pages

ETICONNECT Line-up terminals Technical data line-up terminals POWER NEEDS CONTROL

Features ESC - CBC Series ■ with UL94V-0 polyamide insulating body ■ reduced overall dimension ■ patented "Easy bridge" system: double possibility to insert PTC multi-pole cross-connections, without the need of insulating protection ■ available in grey RAL 7042 ■ operating temperature range: -40 * +80 °C ■ Rated voltage: 1000V ESC-GPA Series power terminal blocks ■ with UL94V-0 polyamide insulating body ■ mounting onto rails - according to IEC 60715 Std.,"G32‘ and "TH/35" types ■ possibility to perform parallel cross-connections (GPA.70) ■ standard version available in grey RAL 7042 Feed...

End sections, blue color Two level terminal blocks *Other cable type max. cross sections in technical data End section for two level terminal blocks U shapped cover for cross connection protection ESC-POF & ESC-PMP, length 10 cm (for use with Red insulation partition to be used in case of cross connections - bridges eticonnect Technical data on page 715, 711 699

Line-up terminals Cross connections - bridges * Connecting bridges can be cut to the desired length ** In connection with connecting bridges we recommend the use of DFM insulation partitions *Other cable type max. cross sections in technical data *Bigger cross sections (6.. ,70mm2) are compact, end sections not needed 700 Technical data on page 709 - 713

Fuse holder terminal block, rated cross section 4mm2 *Other cable type max. cross sections in technical data Fuse holder terminal block, rated cross section 6mm2 *Other cable type max. cross sections in technical data Disconnect terminal block (1-0) *Other cable type max. cross sections in technical data Equipotential distribution terminal boards for Conductor Flexible/Rigid ESC-QBLOK7001 003903204 (10/16)mm2, 7 holes, Blue 45 10 for Conductor Flexible/Rigid ESC-QBLOK7002 003903205 (10/16)mm2, 7 holes, Green 45 10 for Conductor Flexible/Rigid...

Line-up terminals For high harness volumes, ETI offers its own range of spring-clamp terminal blocks suitable for cables from 0.2 to 10 mm2 and reduced current intensity values. In order to protect the clamping system, a special stop is provided in the insulating body; this has the function of ensuring the spring does not go over its elastic range, in case of handling carried out by unskilled workforce. The appropriate sizing of the wire insertion hole, fully in compliance with the requirements given by IEC 60947-1 Standard concerning the gauge, guarantees the insertion of any type of...

Feed through terminal blocks, blue color *Other cable type max. cross sections in technical data End sections, blue color Potential power distribution, grey color terminal blocks *Other cable type max. cross sections in technical data Two level terminal blocks End section for two level terminal blocks eticonnect Technical data on page 723, 721 703

Line-up terminals Three level terminal block *Other cable type max. cross sections in technical data Compatible also with two and three level spring terminal blocks Cross connections - bridges Compatible also with two and three level spring terminal blocks Red insulation partition to be used in case of cross connections - bridges 704 Technical data on page 722, 719

Line-up terminals Disconnect terminal block *Other cable type max. cross sections in technical data Numbering strips ESP-SHZ ESP-SHZ numbering strips can be mounted on the sides of the terminal block or in the appropriate housings provided in the upper part of the terminal block itself. End bracket ES-BTO End bracket, suitable for rails according to IEC 60715/TH 35 (types PR/3); can be mounted directly in the desired position and does not require screw fixing. Especially suitable for fixing screw, high type. ■ of black polyamide ■ thickness: 8 mm Technical data on page 722, 721 705

Line-up terminals Marking tags ■ Marking tags ES-NU0851 suitable for marking all types of terminal blocks (screw-clamp and spring-clamp) in tables of 100 elements in packs of 500 tags; must be ordered in multiples of 100 pcs ■ In white polycarbonate with black printing, to be applied directly into position either before or after preparing the terminal board; tag dimensions: 8 x 5.1 mm ■ Marking tags ES-TA1640AW: must be ordered in multiples of 150 pcs (1 plate). ■ Marking tags ES-TA407AW: must be ordered multiple of 360 pcs (1 plate). Writing type Writing type 51 51 _/—v HORIZONTAL VERTICAL...

Additional covers for terminals and supports Terminal blocks having a cross-section up to 70 mm2 can be protected against accidental contacts or tampering, by means of a PVC transparent cover, supplied in a standard lenght of 2 m, to be mounted on appropriate polyamide supports and to be inserted on PR/DIN, PR/3, "G32" type and TH/35 mounting rails. They can be fixed by sealing the support ends. eticonnect Technical data on page 724 707

Technical data Line-up terminal Features ESC-CBC Series ■ with UL94V-0 polyamide insulating body ■ reduced overall dimension ■ patented "Easy bridge" system: double possibility to insert PTC multi-pole cross-connections, without the need of insulating protection ■ available in grey RAL 7042 and blue RAL 5015 colour version ■ operating temperature range: -40 * +80 °C Easy Bridge System The cross-connection can be supplied in "standard" sizes, for 2-3-10 poles. 1 After having cut the bar according to the number of poles, insert the cross-connection, in the appropriate groove of the terminal...

Cross connections Easy Bridge System ■ screwless, snap-in insertion ■ transversal and staggered mode connection possibility ■ once inserted, intrinsically IPXXB protected resulting installation, without the need for further insulating covers ■ patented system 1-2 After having cut the bar according to the number of poles, insert the cross-connection, in the appropriate groove of the terminal block. At this point, by using the blade of a screwdriver, push down the cross-connection until it reaches its blocking point. The cross connection will be fully insulated and intrinsically IPXXB...