& Features High Performance Network Switching Technology V Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3x Provides 1 x 10/100Base-T(X) Ethernet port with RJ-45 connector V Provides 1 x 100FX multi-mode fiber port with SC connector V Supports Link Loss Forwarding and Link Fault Pass-Through functions V Supports IEEE 802.3x flow control on full duplex, back pressure on half duplex V RJ-45 port supports auto MDI/MDI-X crossover Reliable Power Design V Equipped with redundant power inputs V Supports 12 to 48VDC redundant power with power reverse polarity V Supports overload current protection 3000VDC EFT protection for power line 6000VDC Ethernet ESD protection V Alarm relay design for power or port failure detection Robust Industrial Design V Robust case complies with IP-30 housing standard V Supports operating temperature -10 to 70°C & extended temperature -40 to 80°C V DIN-Rail or wall mounting installation Overview The Retriever Series RUE-111(E) is an Industrial Ethernet to Fiber Converter with one 10/100Base-T(X) Ethernet port and one 100FX multi-mode fiber port. With the fiber optic port, RUE-111(E) transmits data at high speed for long distances up to 2km. RUE-111(E) is equipped with a terminal block to provide dual power inputs with reverse polarity protection. The built-in Link Loss Forwarding promptly alarms users in case of port breaks or power failure. Its IP-30 housing protection, wide operating temperature of -10 to 70°C and DIN-Rail mounting make RUE-111(E) suitable for an industrial environment. The E version model's temperature is -40 to 80°C. The RUE-111(E) is a plug-and-play solution for your Industrial Ethernet applications. Industrial Media Converter Solutions $$ Hardware Specifications Interface Total Ports: 2 ports RJ-45 Port: 1 x 10/100Base-T(X) auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X Fiber Port: 1 x 100FX multi-mode with SC connector LEDs: FAULT, PWR 2, PWR 1 Fiber Port: PWR, LNK/ACT, HDX/FDX RJ-45 Port: HDX/FDX, LNK/ACT, 10/100M Alarm Contact: 1A@24VDC DIP Switch: DIP Switch 1: OFF for disabling power/port alarm, ON for enabling power/port alarm DIP Switch 2: OFF for disabling LLF & LFP, ON for enabling LLF & LFP DIP Switch 3: OFF for 100FX full mode, ON for 100FX half mode DIP Switch 4: OFF for Auto-negotiation, ON for 100Base-TX full duplex mode Link Loss Forwarding: Any link failure detected by the converter on a failure path will show disconnected alarm so that the switches connected can detect the path failure Power Requirements Power Input: 12 to 48VDC, redundant power inputs Power Consumption: 4.6 watts max. Power Protection: Reverse power polarity, over current protection, 3000VDC EFT protection for power line, 6000VDC Ethernet ESD protection Physical Dimensions: IP-31 standard, 54mm (W) x 135mm (H) x 105mm (D) Installation: DIN-Rail or wall mounting Environmental Operating Temperature: Regular: -10 to 70°C Extended: -40 to 80°C Storage Temperature: -40 to 85°C Operating Humidity: 5% to 95% RH (Non-condensing) Technology Specifications Standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3x Flow Control Protocol Technology: CSMA/CD Switching Architecture: Store and Forward Regulatory Approvals EMI: FCC Class A EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5 EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2, EN 61000-6-4 Safety: UL, cUL, CE/EN 60950-1 Shock: IEC60068-2-27 Vibration: IEC60068-2-6 Free Fall: IEC60068-2-32 Environmental: WEEE, RoHS MTBF: 378,174 hours based on Mil-Hdbk-217F, GB Warranty: 5 years Ordering Information