Class 1 Division 2/UL 508 Certified Industrial 8-port Full Gigabit Unmanaged Green Power Ethernet Switch Features High Performance Network Switching Technology Class 1 Division 2 certified UL 508 certified Complies with IEEE standards Supports Green Power Saving technology Provides 6 x 10/100/1000Base-T(X) with RJ-45 connector Provides 2 x multi-mode 1000SX fiber ports 3000VDC EFT protection for power line 6000VDC Ethernet ESD protection Robust Industrial Design Robust case complies with IP-30 housing standard Supports operating temperature -40 to 80°C DIN-Rail or wall mounting installation Reliable Power Design Equipped with redundant power inputs Supports 12 to 48VDC or 18 to 30VAC power input with reverse polarity protection ED Class 1 Division 2 Certified Industrial Ethernet Switch The Husky Series HUG-625GE-PSCDU is a Class 1 Division 2 and UL 508 certified Industrial 8-port Slim Gigabit Unmanaged Ethernet Switch with six 10/100/100Base-T(X) Ethernet ports and two multi-mode 1000SX fiber ports. With the optic ports, HUG-625GE-PSCDU transmits data at high speed for long distances up to 0.5km with an SC connector. HUG-625GE-PSCDU also supports Green Power Saving technology. HUG-625GE-PSCDU complies with IEEE 802.3/802.3u/802.3x/802.3ab with 10/100/1000Mbps, full/half duplex and MDI/MDI-X auto-sensing RJ-45 ports. The compact switch is equipped with a relay output alarm design. It supports 12 to 48VDC or 18 to 30VAC redundant power inputs, and is secured with power polarity reverse protection and overload current protection. HUG-625GE-PSCDU also supports 3000VDC EFT protection for power line and 6000VDC Ethernet ESD protection. The IP-30 housing, wide operating temperature of -40 to 80°C, and DIN-Rail mounting make HUG-625GE-PSCDU suitable for an industrial environment. Hardware Specifications Interface Total Ports: 8 ports RJ-45 Ports: 6 x 10/100 /1000Base-T(X) auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X Fiber Ports: 2 x multi-mode 1000SX, SC connector LEDs: Power 1, Power 2, Fault Fiber Ports: Link/Active RJ-45 Ports: Link/Active, Speed Alarm Contact: 1A@24VDC Physical Dimensions: IP-30 standard, 59.6mm (W) x 152mm (H) x 105mm (D) Installation: DIN-Rail or wall mounting Environmental Operating Temperature: -40 to 80°C Storage Temperature: -40 to 85°C Operating Humidity: 5% to 95% RH (Non-condensing) Power Requirements Power Input: 12 to 48VDC or 18 to 30VAC, redundant power inputs Power Consumption: 9.6 watts max., Green Power Saving technology supported Power Protection: Reverse power polarity, over current protection, 3000VDC EFT protection for power line, 6000VDC Ethernet ESD protection Technical Specifications Standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3x Flow Control IEEE 802.3ab 1000Base-T IEEE 802.3z Gigabit Fiber Protocol Technology: CSMA/CD Switching Architecture: Store and Forward Regulatory Approvals EMI: FCC Class A EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11 , EN 61000-6-2, EN 61000-6-4, EN 61000-3-2, EN 61000-3-3 Safety: UL, cUL, CE/EN 60950-1, Class1 Division 2, UL 508 Shock: IEC 60068-2-27 Vibration: IEC 60068-2-6 Free Fall: IEC 60068-2-32 Environmental: WEEE, RoHS MTBF: 505,864 hours based on Mil-Hdbk-217F, GB Warranty: 5 years Industrial 6 x 10/100/1000Base-T(X) and 2 x Multi-mode 1000SX Full Gigabit Unmanaged Ethernet Switch, -40 to 80°C, Green Power Saving technology, Class 1 Division 2, UL 5