ViCTor 2.2D

Product catalog summary

Introduction
The ViCTor 2.2D is an automated eddy current inspection instrument designed for efficiency and flexibility, particularly for automation engineers. It is based on the ETher NDE AeroCheck+ hardware, offering a user-friendly interface and multiple configuration options.

Advantages

Simultaneous use of two probes for efficient inspection.
Separate dual alarms and a large, bright LCD screen with external VGA output.
Includes rotary drive and conductivity features.
Configurable I/O capability and remote control via USB or RS-232.
Dual analogue outputs for simple recording and real-time data streaming over USB.
Powered by 24V DC for easy industrial integration.
DLL available for software integration by end users.

Applications

Detection of surface and sub-surface defects in non-ferrous materials.
Heat treatment and material property verification.
Sensing applications for geometry verification, such as thread presence and butt-weld detection.

Specifications

Probe Connectors: 2 off 12 Way Lemo 2b and Lemo 00 for single element absolute probes.
Rotary Drive: Probe 1 only, 600-3000 rpm.
Conductivity: Probe 1 only, active with AeroCheck+ conductivity probe.
Frequency: Dual Frequency 10 Hz to 12.8 MHz.
Gain: Overall -18 to +104 dB, with various step options.
Phase Range: 0.0-359.9°, 0.1° steps.
Filters: High Pass and Low Pass options with adaptive balance drift compensation.
Balance: Manual and automatic options with internal balance loads.
Mix Channel: Full frequency range available on both channels.
Alarm Gates: 2 independent, configurable on Pane 1, Pane 2, or both.
Display: 5.7” daylight readable, 640 x 480 pixels resolution, user-configurable color schemes.
Data Storage: Micro SD up to 32GB for settings, screen shots, and data recordings.
Advanced Features: Real-time data logging, slide show guides, and calibration reference signal storage.
Inputs/Outputs: USB and RS-232 connectivity, analogue and digital outputs, VGA output.
Languages: Available in multiple languages including English, French, Spanish, and more.
Verification: Includes a 2-year validity verification as per ISO 15548-1:2013.
Power: External 100-240 V, 50-60Hz, 30 Watts.
Physical: Weight 3.3 kg, dimensions 246 x 152 x 250 mm, operating temperature -20 to +60 °C.

Conclusion
The ViCTor 2.2D is ideally suited for automated inspection of rotationally symmetric components due to its non-contacting, high-speed capabilities, and cost-effectiveness. It is particularly effective for surface defect detection and offers a wide variety of probe options.

Catalog excerpts

EDDY CURRENT AUTOMATED INSPECTION INSTRUMENT ETher NDE is introduces the ViCTor 2.2D, the userfriendly automated eddy current inspection system, designed with the Automation Engineer in mind. Based on the ETher NDE AeroCheck+ Hardware, NDT Inspectors will become quickly familiar with its user interface and with a variety of case configurations available, the ViCTor 2.2D offers maximum flexibility for each individual application. APPLICATIONS • Surface breaking defects. • Sub-surface defects in non-ferrous materials. • Heat Treatment / material property verification. • Sensing applications for verifying geometry such as the presence of threads, butt-weld detection. ADVANTAGES • Capable of using two probes simultaneously for more efficient inspection. • Separate dual alarms. • Large bright LCD screen and external VGA for monitor output. • Includes rotary drive and conductivity. • Configurable I/O capability using voltage free contacts. • USB or RS-232 remote control. • Dual analogue outputs giving simple recording. • Powered by 24V DC for easy integration in an industrial control system. • RS-232 and USB remote control for easy Control System Integration. • Ability to stream real time data over USB. • A DLL is available to permit software i

Open the catalog to page 1

ETHER nde Q Eddy Current is ideally suited to inspection automation particularly of so called rotationally symmetric components for the following reasons: Non-contacting, High Speed (potentially up to 200ms-1), no couplant required or effluent produced, good for surface defect detection, instant coupling, wide variety and geometry of probes available, cost effective and ideal for rotationally symmetrical components e.g. bearings, gudgeon pins, cylinder liners etc. Document number 5028: Issue 1

Open the catalog to page 2

ViCTor 2.2D

ViCTor 2.2D

Catalog excerpts

All Ether NDE catalogs and technical brochures