Datasheet torque sensor PH

Product catalog summary

Overview: The document provides technical specifications and features of the PH torque sensor designed for hydraulic tools. It highlights the sensor's capabilities in measuring torque and pressure, and its compatibility with evaluation devices.

Specifications:

Measurement Ranges: 10 kNm and 20 kNm with switch-over capability.
Supply Voltage: 12V DC ± 10%.
Power Consumption: 60-100 mA.
Output Signal: 0 to ±5 V.
Nonlinearity Error: < 0.5%.
Hysteresis Error: < 0.1%.
Zero Point Deviation: ≤ ±100 mV.
Compensated Temperature Range: 5-45°C.
Operating Temperature: 0-60°C.
Temperature Error: Zero Point 0.02%/K, Sensitivity 0.01%/K.
Mechanical Overload: 50%.
Internal Protection: IP40.
Connection: 12-pin connector.

Features:

Adjusting and testing tools before screwing.
Inspection compliant with DIN EN ISO 9000ff.
Creation of torque and pressure tables with evaluation devices GMV2 and ValueMasterbase.
Portable test bench capability.
Direct attachment of tools with a connecting square according to DIN 3121.
Availability of adapters for various tools.

Mechanical Dimensions:

Dimensions for 10 kNm: L 464 mm, B 210 mm, H 259 mm, Weight 41 kg.
Dimensions for 20 kNm: L 571 mm, B 250 mm, H 374 mm, Weight 90 kg.
Square Socket: 1 ½” for 10 kNm, 2 ½” for 20 kNm.

Accessories:

Adapters and counterholds available on request.
ETH-Measurement cable.
Evaluation devices: GMV2 and ValueMasterbase.

Calibration: Factory certificate in 25% steps clockwise. Special calibration available on request.

Catalog excerpts

Hagstraße 10 · 74417 Gschwend w w w.eth-messtechnik.de Datasheet tourque sensor for Hydraulic Tools 2 Measurement ranges with up to 10 kNm and 20 kNm switch-over of the measuring range delivery without test object, adapter or counterpart Features • adjusting and testing tools before screwing • inspection as per DIN EN ISO 9000ff • Create torque tables with evaluation device GMV2 • Create torque and pressure tables with evaluationunit ValueMasterbase • portable test bench The PH torque sensor makes it easy to preset hydraulic tools, create torque tables or check the power range of the tool. Together with the evaluation device GMV2, the determined torque values can be displayed and documented. In combination with the ValueMasterbase evaluation device, torque values and (optionally with pressure sensor) pressure values can be documented. The integrated chip in the GMV2 recognizes the measuring range and checks the parameter set setting. Tools with a connecting square according to DIN 3121 can be attached directly. We supply the required adapters for adapting the various tools. Various adapters are available on request for tools with a hexagonal drive. Subject to change without notice

Open the catalog to page 1

Elektrische Daten PH Supply voltage: Power consumption: Output signal: Deviation at zero point: Compensated temperature range: Operating temperature: Temperature error Zero point: Sensitivity: Mechanical overload: Internal protection: Calibration: Factory certificate in 25 % steps cw. Special calibration on request. square socket: counterhold (Accesory): Ordering code Available accessories • adapter • counterhold • ETH-Measurement cable  a = ac�ve  measuring range* (kNm) • evaluation devices: GMV2 ValueMasterbase * other measuring ranges and measuring range switches on request messtechnik gmbh...

Open the catalog to page 2

Datasheet torque sensor PH

Datasheet torque sensor PH

Catalog excerpts

All ETH-messtechnik gmbh catalogs and technical brochures